| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Cement Defoamer, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc. Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the world, sourcing from overseas, manufacturing overseas, quality control, GHS compliance, etc. |
| Aadhunik Industries and/or associated units are FDA-cGMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We supply very high purity standards as per specifications required. |
---------- 
---------- 
Translate
Cement Defoamer Manufacturers Exporters
SDS, MSDS of Cement Defoamer Manufacturers
We offer high performance cement defoamer for accurate cement slurry density and reducing risk of cavitation. There is no undesirable effect on cement properties. It is compatible with additives used in typical cement slurries. Concentrations range from 0.005 to 0.5 gallons of defoamer per bag of cement is enough. The product is stable under normal conditions.
Typical properties are as under:
Form: Liquid
Color: Opaque
Odor: Hydrocarbon
Vapor Pressure: ND
Solubility in water: Insoluble
Specific Gravity: 0.90 (Water = 1)
Bulk Density: 7.51 pounds per gallon
pH: 5.5 - 7.9
Cement Defoamer manufacturers exporters at:
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.
e-mail: info@aadhunikindustries.com
Copyright and Usual Disclaimer is Applicable. 6-06-2022
C-503L Cement Defoamer SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Cement Defoamer
CAS No.: Mixture
Recommended usage: Industrial Manufacturing.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
Skin irritation (Category 2), H315
Serious eye damage/eye irritation (Category 2B) H320
Specific target organ toxicity, repeated exposure (Category 1) H372
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements  Irritant |
GHS Label Elements |
Signal Words: Danger
Hazard statements:
H302- Harmful if swallowed.
H315 - Causes skin irritation.
H320 - Causes eye irritation.
H372 - Causes damage to organs through prolonged or repeated exposure.
Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get Medical advice/attention if you feel unwell.
P330: Rinse mouth.
P362: Take off contaminated clothing and wash before reuse.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
P501: Dispose of contents/container to authorized agents only.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xi Irritant, Xn Harmful
R36/38 - Irritating to eyes and skin.
R35 - Causes severe burns.
S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
3. Composition/Information on Ingredients
| Chemical Name | Amount |
CAS Number |
POLYETHER POLYOL |
Confidential |
25322-69-4 |
HYDROPHOBIC SILICA |
Confidential |
67762-90-7 |
ALKENES, C15-18 |
Confidential |
93762-80-2 |
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Get immediate medical attention. If vomiting should occur spontaneously, keep airway clear.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Remove any contact lenses and continue flushing. Get medical attention immediately.
5. Fire Fighting Measures
Fire: Can burn in fire, releasing toxic vapors. As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Combustion Products: Toxic gases may be produced.
6. Accidental Release Measures
Safeguards (Personnel): Protect skin and eyes from exposure.Initial Containment: Contain spilled material. Absorb spills with inert material. Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.
Small Spill: Secure the spill area. Absorb spills with inert material. Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.
Large Spill: Contain spilled material. Absorb spill with inert material (e g, dry sand or earth), then place in a chemical waste container. Treat or dispose of waste material in accordance with all local, state/provincial, and national requirements.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Avoid dust formation and control ignition sources.
Handling (Personnel ): Avoid contact with skin and eyes. Keep out of reach of children.
Storage Precautions: Store away from oxidizers or materials bearing a yellow 'DOT' label.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Hydrophobic Silica has the following limits:
OSHA PEL: 10 mg/m^3 ACGIH TWA: 10 mg/m^3
Maintain this limit for the mixture.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Form: Liquid
Color: Opaque
Odor: Hydrocarbon
Vapor Pressure: ND
Solubility in water: Insoluble
Specific Gravity: 0.90 (Water = 1)
Bulk Density: 7.51 pounds per gallon
pH: 5.5 - 7.9
% Volatiles: ND
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide and fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizers.
Conditions to Avoid: Avoid contact with acids and oxidizers..
11. Toxicological Information
No information available
12. Ecological Information
No information available
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Material in accordance with legal requirements.
14. Transport Information
DOT (USA) & ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
15. Regulatory Information
USA:
This product contains hazardous materials as defined by the OSHA Hazard Communication Standard 29 CFR 1910.1200. As defined under Sara 311 and 312, this product contains materials that are acute hazards.
16. Other Information
European/International Regulations European Labeling in Accordance with EC Directives
H302- Harmful if swallowed.
H315 - Causes skin irritation.
H320 - Causes eye irritation.
H372 - Causes damage to organs through prolonged or repeated exposure.
Xi Irritant, Xn Harmful
R36/38 - Irritating to eyes and skin.
R35 - Causes severe burns.
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Hydraulic Fracturing Chemicals