| Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid BHMT BHMTPMPA, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc. Our services are 24/7 deliveries, including week-end deliveries, wellsite logistics in ISO tanks, logistics & warehousing across the world, sourcing from overseas, manufacturing overseas, quality control, GHS compliance, etc. |
| Aadhunik Industries and/or associated units are FDA-cGMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We supply very high purity standards as per specifications required. |
---------- 
---------- 
Translate
Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid BHMT BHMTPMPA Manufacturers Exporters
SDS, MSDS of BHMT BHMTPMPA Manufacturers
BHMT is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale. Bis(HexaMethylene Triamine Penta (Methylene Phosphonic Acid)) has good water soluble properties and heat tolerance. Bis(HexaMethylene Triamine Penta (Methylene Phosphonic Acid)) has high calcium ion tolerance in a wide pH ranges and temperature as high as 120C. BHMTPMPA can be used as scale and corrosion inhibitor for oilfield water, industrial circulating cool water and boiler.
Specification:| Appearance | Dark brown liquid |
| Active component % | 43.0-48.0 |
| Chloride (Cl-)% | 8.0 max |
| Fe(as Fe3+)ppm | 65 max |
| density(20C)g/cm3 | 1.20 min |
| pH value (1% water solution) | 2.0 max |
Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid BHMT BHMTPMPA manufacturers exporters at:
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.
e-mail: info@aadhunikindustries.com
Copyright and Usual Disclaimer is Applicable. 6-06-2022
BHMT BHMTPMPA Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid Solution SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: BHMT BHMTPMPA Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid Scale Inhibitor aqueous solution
CAS No.: 34690-00-1
EINECS EC Code: 252-156-6
Molecular Weight: 685
Chemical Formula: C17H44N3O15P5
Relevant Uses: Oil & Gas Wells and Industrial Use.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin Corrosion/Irritation (Category 2)
Serious Eye Damage/Irritation (Category 1)
Aquatic Toxicity Chronic, (Category 3 )
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements Corrosive |
Signal Words: Warning
Hazard Statements:
H315: Causes skin irritation.
H318: Causes serious eye damage
H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements:
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P310: Immediately call a POISON CENTER or doctor/physician.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P302+352 - IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P332+313: If skin irritation occurs, get medical advice/attention.
P337+313: If eye irritation persists, get medical advice/attention.
P501: Dispose of contents/container in accordance with local/national regulation.
Classification according to Directive 67/548/EEC or 1999/45/EC:
C Corrosive
N Dangerous for the environment
R34 Causes burns
R36 Irritating to eyes.
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face protection.
S 45 In case of accident or if you feel unwell, seek medical advice immediately
S 60 This material and its container must be disposed of as hazardous waste.
3. Composition/Information on Ingredients
Ingredient: : Bis HexaMethylene Triamine Penta Methylene Phosphonic Acid BHMT PMPA
Percentage: 43-48% in water.
EINECS EC Code: 252-156-6
CAS No.: 34690-00-1
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
5. Fire Fighting Measures
Auto-Ignition Temperature: NA.
Flash Points: NA.
Products of Combustion: Oxides of Carbon, Nitrogen and Phosphorous. Toxic Fumes and phosphine, inorganic acids are expected.
Fire Extinguishing Media: Regular dry chemical, carbon dioxide, water, and regular foam. For large fires use regular foam or flood with fine water spray.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemical for small fires. Use water spray to keep containers cool. Do not get water directly on material. Avoid inhalation of material or combustion by-products. Stay upwind and keep out of low areas.
6. Accidental Release Measures
Small Spill: Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled material in a convenient waste disposal container. Dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible, inorganic absorbent material, or sweep up, and remove to an approved disposal container. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Do not breathe mist. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat or smoke while handling. Respect good personal hygiene.
Avoid contact with skin and eyes. Avoid formation of mist and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Keep away from ignition sources and naked flame. The reuse of this material's container for non industrial purposes is prohibited.
Suitable materials of construction: Glass lining, PVC, polypropylene, glass reinforced plastic, and polyethylene.
Unsuitable materials of construction: Mild steel, carbon steel, aluminum, and other metals.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: It is a dark amber colored liquid.
Odor: Characteristic.
Solubility: It is soluble in water.
pH: less than 2 for 1% solution at 25C (77F)
Density: 1.2 g/cm3
% Volatiles by volume @ 21C (70F): 0
Boiling Point: > -
Melting Point: < -.
Molecular Weight: 685,
Molecular Formula: C17H44O15N3P5
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. Avoid contact with strong acids, alkali or oxidizing agents and heat..
Hazardous Decomposition Products: It emits toxic fumes and carbon monoxide when heated to decomposition. It may form carbon dioxide and unidentified compounds at elevated temperatures. Phosphine, inorganic acids, oxides of phosphorus are expected
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid contact with strong acids, alkali or oxidizing agents. Incompatible with bases, amines, metals, sulfites, reducing agents, oxidizing materials.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation. Ingestion.
Toxicity to Animals: LD50: Not available. LC50: Not available.
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Environmental Fate: Based on available information the product has low tendency to bio accumulate.
Environmental Toxicity: The material is not considered as environmental hazard.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
LAND TRANSPORT (US DOT):
UN number: 3265
Hazard Class: 8
Proper Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
([[(Phosphonomethyl)imino]bis[hexamethylenenitrilobis(methylene)]]tetrakisphosphonic acid)
Packaging group: III
Marine pollutant: No
IATA, ADR/RID & IMDG:
UN number: 3265
Hazard Class: 8
Proper Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
([[(Phosphonomethyl)imino]bis[hexamethylenenitrilobis(methylene)]]tetrakisphosphonic acid)
Packaging group: III
Marine pollutant: No
15. Regulatory Information
United States:
SECTION 311/312: Acute Health.
SECTION 313: None
CERCLA RQ: None
California Proposition 65: No
Canada
WHMIS (Canada): Class E, Corrosive material
16. Other Information
EINECS EC Code: 252-156-6
European Labeling in Accordance with EC Directives
H315: Causes skin irritation.
H318: Causes serious eye damage
H412: Harmful to aquatic life with long lasting effects.
C Corrosive
N Dangerous for the environment
R34 Causes burns
R36 Irritating to eyes.
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Hydraulic Fracturing Chemicals