Chlorocresol SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Chlorocresol or p-Chlorocresol or PCMC or 4-Chloro-3-methylphenol, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

p-Chlorocresol or PCMC or 4-Chloro-3-methylphenol SDS Safety Data Sheet
MSDS, Material Safety Data Sheet 06-Oct-21

Product Name & Other Names: p-Chlorocresol or PCMC or 4-Chloro-3-methylphenol.
CAS No.: 59-50-7
EINECS EC Number: 200-431-6
Chemical Formula: C7H7ClO or ClC6H3(CH3)OH
Molecular Weight: 142.58
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, oral Category 4, H302
Acute toxicity, Dermal Category 4, H312
Skin sensitization, Sub-category 1B, H317
Serious eye damage Category 1, H318
Short-term (acute) aquatic hazard Category 1, H400

Hazard statements:
H302 + H312 Harmful if swallowed or in contact with skin.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H400 Very toxic to aquatic life.

Precautionary statements:
P202: Do not handle until all safety precautions have been read and understood.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P284: Wear respiratory protection.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308+313: IF exposed or concerned: Get medical advice/attention.
P391: Collect spillage.
P405: Store locked up.
P403+233: Store in a well-ventilated place. Keep container tightly closed.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Product Name & Other Names: p-Chlorocresol or PCMC or 4-Chloro-3-methylphenol.
CAS No.: 59-50-7
EINECS EC Number: 200-431-6

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin: Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes: Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation: Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: Fumes may evolve along with carbon oxides and hydrogen chloride.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Don't touch or walk through this product. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid prolonged or repeated exposure. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like oxidizing agents.

Exposure Limits: Contains no components with established occupational exposure limits.
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

Appearance: White/pink solid.
Odor: Phenolic.
Odor threshold: No data found.
pH: No data found.
Relative density: 1.37 @ 20C.
Melting Point: 64C-67C literature.
Initial boiling point and boiling range: 235C literature.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility(ies): 3.8 g/l @20C in water.
Viscosity: No data found.
Chemical Formula: C7H7ClO or ClC6H3(CH3)OH
Molecular Weight: 142.58

Chemical Stability: Stable under normal temperatures and pressures.
Incompatibility (Materials to Avoid): Oxidizing agents, copper and alloys.
Conditions to Avoid: Incompatible materials, excessive heat.
Hazardous Decomposition Products: Fumes may evolve along with carbon oxides and hydrogen chloride.
Hazardous Polymerization: Will not occur.

Toxicity to Animals:
LC50 Inhalation - Rat - 4 h – >287 mg/l
LD50 Oral - Rat - 1830 mg/kg
LD50 Dermal - Rat - female - 2.000 mg/kg
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP ACGIH or OSHA.
Mutagenic Effects: No data found.
Reproductive Effects: No data found.
Developmental Toxicity: No data found.

Ecotoxicity: Very toxic to aquatic organisms.
Toxicity to fish: semi-static test LC50 - Oncorhynchus mykiss (rainbow trout) - 0,92 mg/l - 96,0 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 2,29 mg/l - 48 h.
Persistence and Degradability: Degradable.
Mobility: Likely to be mobile.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.

Dispose of in accordance with all applicable local, state and federal regulations at an approved waste disposal facility.

DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN 3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Chlorocresol)
Hazard Class 9, Packing Group III
IMDG/IMO
UN-No UN 3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Chlorocresol)
Hazard Class 9, Packing Group III
IATA:
UN-No UN 3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (Chlorocresol)
Hazard Class 9, Packing Group III

USA:
SARA 311/312: Acute Health Hazard; Chronic Health Hazard, as per section 2.
California Prop.65: This product contains no chemical known to the State of California to cause birth defects or other reproductive harm.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 59-50-7, Chlorocresol or p-Chlorocresol or PCMC or 4-Chloro-3-methylphenol manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.