Potassium Chloride Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Potassium Chloride, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

KCl Dry Basis Assay (DBA): 98% min KCl Potassium Chloride
K2O: 60% min
Iron: 100 ppm
Matter insoluble in water: 0.1% max
Moisture % by Wt. Max: 1%
Packing: In 50 Kgs. HDPE bags with double HMHDP liners or in Jumbo bags or as required by the buyer.

Potassium Chloride Pure used as a Potassium source, in electroplating, pharmaceuticals etc.: Show/Hide Details

KCl Dry Basis Assay (DBA): 99% (KCl) Potassium Chloride
Iron: 10 ppm
Sodium Chloride: 1%
Matter insoluble in water: 0.05%
Sulphate: 0.05%
Heavy metals as Lead: 5 ppm
Hydroxides: .01%
Calcium: 0.02%
Magnesium: 0.05%
Moisture % by Wt. Max: 1%
Packing: In 50 Kgs. HDPE bags with double HMHDP liners or in Jumbo bags or as required by the buyer.

Dry Basis Assay (KCl): 99.0% Potassium Chloride
Description: White, crystalline powder, odorless.
Solubility: Freely soluble in water; sparingly soluble in ethanol (95%).
Matter Insoluble in Water: Clear & colourless solution (10% KCl w/w).
Acidity or Alkalinity: Passes the Test
Barium: Passes the Test
Arsenic: 1 ppm max.
Iron: 20 ppm max.
Calcium & Magnesium: Passes the Test
Sulphate: 300 ppm max.
Heavy Metals: 10 ppm max.
Bromide: 0.1%
Iodide: Passes the Test
Loss on Drying: 1.0% max.

Potassium Chloride USP
KCl -- 74.55
Assay— Potassium Chloride contains not less than 99.0 percent and not more than 100.5 percent of KCl, calculated on the dried basis.
Packaging and storage— Preserve in well-closed containers.
Labeling— Where intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Potassium and for Chloride.
Acidity or alkalinity— To a solution of 5.0 g in 50 mL of carbon dioxide–free water add 3 drops of phenolphthalein TS: no pink color is produced. Then add 0.30 mL of 0.020 N sodium hydroxide: a pink color is produced.
Loss on drying — Dry it at 105 for 2 hours: it loses not more than 1.0% of its weight.
Iodide or bromide—
IODIDE—
Standard stock solution— Transfer an accurately weighed quantity, about 41 mg, of potassium iodide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix.
Standard solution— Dilute 1.0 mL of Standard stock solution with water to 25 mL, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with “Add 1 mL each of chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 2 drops of a chloramine T solution (0.1 in 100), and shake gently. The violet color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.005%.
BROMIDE—
Standard solution— Transfer an accurately weighed quantity, about 32 mg, of sodium bromide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with “Add 1 mL each of chloroform”.
Test solution— Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 5 drops of a chloramine T solution (1 in 100), and shake gently. The brown color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.1%.
Aluminum— where it is labeled as intended for use in hem dialysis— Proceed as directed using 2.0 g of Potassium Chloride to prepare the Test Preparation: the limit is 1 µg per g.
Calcium and magnesium— To 20 mL of a solution (1 in 100) add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Sodium— A solution (1 in 20), tested on a platinum wire, does not impart a pronounced yellow color to a non-luminous flame.
Heavy metals— Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Organic volatile impurities: meets the requirements.

Potassium Chloride BP
KCl 74.55
DEFINITION
Content
99.0 per cent to 100.5 per cent of KCl (dried substance).
CHARACTERS
Appearance
White or almost white, crystalline powder or colourless crystals.
Solubility
Freely soluble in water, practically insoluble in anhydrous ethanol.
IDENTIFICATION
It gives the reactions of chlorides.
Solution S gives the reactions of potassium.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 50 ml of solution S add 0.1 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides: Maximum 0.1 per cent.
Iodides: Moisten 5 g by the drop wise addition of a freshly prepared mixture of 0.15 ml of sodium nitrite solution, 2 ml of 0.5 M sulphuric acid , 25 ml of iodide-free starch solution and 25 ml of water. After 5 min, examine in daylight. The substance shows no blue colour.
Sulphates: Maximum 300 ppm.
Aluminium: Maximum 1.0 ppm, if intended for use in the manufacture of hem dialysis solutions.
Barium: To 5 ml of solution S add 5 ml of distilled water and 1 ml of dilute sulphuric acid. After 15 min, any opalescence in the solution is not more intense than that in a mixture of 5 ml of solution S and 6 ml of distilled water.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Sodium: Maximum 0.10 per cent, if intended for use in the manufacture of parenteral preparations or hem dialysis solutions.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 C for 3h.

Potassium Chloride
KCl 74.55
Formula wt 74.55
DESCRIPTION: Potassium Chloride occurs as colorless, elongated, prismatic, or cubical crystals, or as a white, granular powder. It is stable in air. Its solutions are neutral to litmus. It may contain up to 1.0% (total) of suitable food-grade ant-caking, free-flowing, or conditioning agents such as calcium stearate or silicon dioxide, either singly or in combination. One gram dissolves in 2.8 mL of water at 25°, and in about 2 mL of boiling water. Potassium Chloride containing anti-caking, free-flowing, or conditioning agents may produce cloudy solutions or dissolve incompletely. It is insoluble in alcohol.
Function: Nutrient; gelling agent; salt substitute; yeast food.
REQUIREMENTS:
Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Chloride.
Assay: Not less than 99.0% of KCl after drying; and not less than 98.0% of KCl after drying when a sample contains added substance.
Acidity or Alkalinity: A sample containing no added substance passes test.
Heavy Metals (as Pb): Not more than 5 mg/kg.
Iodide and/or Bromide: Passes test.
Loss on Drying: Not more than 1.0%.
Sodium: Passes test.

Potassium Chloride ACS Specifications AR Analytical Reagent Grade: Show/Hide Details

American Chemical Society Reagent Grade
Potassium Chloride KCl
Formula Wt 74.55
CAS Number 7447-40-7
REQUIREMENTS
Assay: ---------------------- 99.0-100.5% KCl
pH of a 5% solution --------- 5.4-8.6 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ------------ 0.005%
Iodide (I) ------------------ 0.002%
Bromide (Br) ---------------- 0.01%
Chlorate and nitrate (as NO3) 0.003%
Nitrogen compounds (as N) --- 0.001%
Phosphate (PO4) ------------- 5 ppm
Sulfate (SO4) --------------- 0.001%
Barium (Ba) ----------------- Passes test
Heavy metals (as Pb) -------- 5 ppm
Iron (Fe) ------------------- 3 ppm
Calcium (Ca) ---------------- 0.002%
Magnesium (Mg) -------------- 0.001%
Sodium (Na) ----------------- 0.005%

CAS Number 7447-40-7, Potassium Chloride Commercial Pure & IP BP USP ACS Analytical Reagent FCC Food grade manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.