Magnesium Chloride Hexahydrate & Magnesium Chloride Anhydrous (Low Moisture) Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Magnesium Chloride Hexahydrate & Magnesium Chloride Anhydrous Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

We offer Magnesium Chloride Hexahydrate as crystals, flakes and granules in commercial pure and pharmacopoeia grades. We also offer Magnesium Chloride Anhydrous as powder, flakes granules and blocks in commercial pure grade.

Magnesium Chloride Anhydrous Powder, Flakes etc of assured very low moisture: Show/Hide Details

We also offer pure Pharmaceutical grade Magnesium Chloride Anhydrous of Dry Basis Assay >99.9%+, free from all impurities.

MOLECULAR FORMULA MgCl2
MOLECULAR WEIGHT 95.21
Particulars .............. Specification ................ Results
Assay as MgCl2 ........... Min 98% ...................... 98.22%
Identification ........... Positive for Chloride & Magnesium
Solubility ............... ------ Freely soluble in water ------
Description .............. ---- A white deliquescent powder ----
.......................... --- free from visible impurities ----
pH of 10% w/v solution ... 5.0-6.5 ...................... 6.1
Sodium as Na ............. 50 ppm max ................... 10 ppm
Lead as Pb ............... 4 ppm max .................... 1 ppm
Moisture ................. 2% max ....................... 1.15%
Heavy metals ............. 20 ppm max ................... 4 ppm
Matter insoluble in water- 1000 ppm max ................. 560 ppm
Sulfate as SO4 ........... 300 ppm max .................. 15 ppm
Arsenic .................. 1 ppm max .................... Nil
Iron as Fe ............... 20 ppm max ................... 5 ppm
Total Aerobic Count ...... 1000 cfu/g max ............... 410 cfu/g

Magnesium Chloride Hexahydrate Pure Crystals-Pellets
Formula: MgCl2-6H2O
Molecular Weight: 203.3
Purity as MgCl2.6H2O: 99.5% minimum
Appearance: White Crystals or White Pellets
Sulphate: 0.01% maximum
Calcium: 0.1% maximum
Iron: 10 ppm maximum
Heavy Metals: 1 ppm maximum
Magnesium Chloride Hexahydrate Technical Crystals
Formula: MgCl2-6H2O
Molecular Weight: 203.3
Purity as MgCl2.6H2O: 99% minimum
Appearance: White to off-White Crystals
Sulphate: 0.5% maximum
Calcium: 0.7% maximum
Iron: 25 ppm maximum
Heavy Metals: 5 ppm max
Magnesium Chloride Hexahydrate Technical Flakes
Formula: MgCl2-6H2O
Molecular Weight: 203.3
Purity as MgCl2.6H2O: 99% minimum
Appearance: White Flakes
Sulphate: 0.5% maximum
Calcium: 0.7% maximum
Iron: 25 ppm maximum
Heavy Metals: 5 ppm maximum

MgCl2.6H2O 203.30
Magnesium Chloride USP
Magnesium Chloride Hexahydrate USP[7791-18-6].
Magnesium Chloride Anhydrous USP95.21 [7786-30-3].
Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.
Packaging and storage— Preserve in tight containers.
Labeling— Where the product is intended for use in hem dialysis, it is so labeled.
Identification— A solution (1 in 20) responds to the tests for Magnesium and for Chloride
pH: between 4.5 and 7.0, in a 1 in 20 solution in carbon dioxide-free water.
Insoluble matter— not more than 0.005% is found.
Sulfate — A 10-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium— Dissolve 1 g in 10 mL of water, and add 1 mL of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium— the limit is 0.01%.
Potassium— Dissolve 5 g in 5 mL of water, and add 0.2 mL of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum (where it is labeled as intended for use in hem dialysis)— the limit is 1 µg per g.
Heavy metals — the limit is 0.001%.
Organic volatile impurities: meets the requirements.

MgCl2.6H2O
Magnesium Chloride BP
Magnesium Chloride Hexahydrate BP[7791-18-6].
Magnesium Chloride Anhydrous BP95.21 [7786-30-3].
DEFINITION
Content
98.0 per cent to 101.0 per cent of MgCl2,6H2O.
CHARACTERS
Appearance
Colourless crystals, hygroscopic.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
IDENTIFICATION
Water % (see Tests).
It gives reaction of chlorides.
It gives the reaction of magnesium.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 5 ml of solution S add 0.05 ml of phenol red solution R. Not more than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Bromides
Maximum 500 ppm.
Sulphates
Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 0.1 per cent.
Iron
Maximum 10 ppm, determined on solution S.
Potassium
Maximum 5.0 × 100 ppm, if intended for use in the manufacture of parenteral dosage forms.
Atomic emission spectrometry: Passes the test
Heavy metals
Maximum 10 ppm.
Water
51.0 per cent to 55.0 per cent, determined on 50.0 mg.

Magnesium Chloride FCC Food Grade, US Food Chemical Codex: Show/Hide Details

MgCl2·6H2O Formula wt 203.30
DESCRIPTION
Magnesium Chloride occurs as colorless flakes or crystals. It contains six molecules of water of hydration. It is hygroscopic, very soluble in water, and freely soluble in alcohol.
Function: Color-retention agent; firming agent.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Magnesium and for Chloride.
Assay: Not less than 99.0% and not more than 105.0% of MgCl2·6H2O.
Ammonium: Not more than 0.005%.
Lead: Not more than 4 mg/kg.
Sulfate: Not more than 0.03%.

Magnesium Chloride ACS American Chemical Society Reagent Grade
MgCl2-6H2O
Formula Wt 203.30
CAS Number 7791-18-6
REQUIREMENTS
Assay: 99.0-102.0% MgCl2-6H2O
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%;
Nitrate (NO3): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.002%
Ammonium (NH4): 0.002%
Barium (Ba): 0.005%
Calcium (Ca): 0.01%
Manganese (Mn): 5 ppm
Potassium (K): 0.005%
Sodium (Na): 0.005%
Strontium (Sr): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm

CAS Number 7791-18-6 & 7786-30-3, Magnesium Chloride Hexahydrate & Magnesium Chloride Anhydrous manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.