Zinc Peroxide SDS MSDS Sheet of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Zinc Peroxide, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Oxidising liquids; Oxidising solids Category 1
Hazardous to the aquatic environment, acute hazard Category 3
Skin corrosion/irritation Category 2
Serious eye damage/eye irritation Category 2A
Chronic aquatic toxicity Category 1

Hazard Statements:
H271: May cause fire or explosion; strong oxidiser.
H315 : Causes skin irritation.
H319: Causes serious eye irritation.
H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements P371+P380+P375,
P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P220: Keep/Store away from clothing/other combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P273: Avoid release to the environment.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P283: Wear fire/flame resistant/retardant clothing.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+313: If eye irritation persists get medical advice/attention.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P306+360: IF ON CLOTHING: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P370+378: In case of fire: Use Dry chemical, carbon dioxide, Halon, water spray, or fog for extinction. If water is used, apply from as far a distance as possible.
P371+380+375: In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.
P362: Take off contaminated clothing and wash before reuse.
P391: Collect spillage.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
O Oxidising
Xi Irritant
R8 Contact with combustible material may cause fire
R36/38 Irritating to eyes and skin
R53 May cause long-term adverse effects in the aquatic environment

Inhalation: If is inhaled, remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

Fire: Sbstance is a strong oxidizer and its heat of reaction with reducing agents or combustibles may cause ignition.
Explosion: May explode when shocked, exposed to heat or flame, or by spontaneous chemical reaction. Sealed containers may rupture when heated. Sensitive to mechanical impact.
Fire Extinguishing Media: Dry chemical, carbon dioxide, Halon, water spray, or fog. Water spray may be used to keep fire exposed containers cool. Do not allow water runoff to enter sewers or waterways.
Special Information: Wear full protective clothing and breathing equipment for high-intensity fire or potential explosion conditions. This oxidizing material can increase the flammability of adjacent combustible materials.

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal.

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage and moisture. Isolate from any source of heat or ignition. Avoid storage on wood floors. Separate from incompatibles, combustibles, organic or other readily oxidizable materials. Containers of may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

Airborne Exposure Limits: TWA 2.0 mg/m3 USA, ACGIH Threshold Limit Values (TLV).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: Light yellow powder or granules.
Odor: Odorless.
Solubility: Not available.
Specific Gravity: 1.57
pH: Not available.
% Volatiles by volume @ 21C (70F): Not available.
Boiling Point: Not available.
Melting Point: 212C

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Oxides of zinc, fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Organic compounds, carbonaceous materials, reducing agents, moisture, heat, light, and many other substances.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.

Oral rat LD50: Not available.
This product is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.

Toxicity: No data available
Persistence and degradability: No data available
Mobility in soil: No data available

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. Dispose of container and unused contents in accordance legal requirements.

Domestic (Land, D.O.T.)
Proper Shipping Name: Zinc Peroide
Hazard Class: 5.1
UN/NA: UN1516
Packing Group: II
International (Water, I.M.O.)
Proper Shipping Name: Zinc Peroide
Hazard Class: 5.1
UN/NA: UN1516
Packing Group: II
International (Air, I.C.A.O.)
Proper Shipping Name: Zinc Peroide
Hazard Class: 5.1
UN/NA: UN1516
Packing Group: II

USA:
SARA 313: Yes
SARA 311/312: Reactivity Hazard, Acute Health Hazard
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

CAS Number 1314-22-3, Zinc Peroxide manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.