Tin (II) 2-ethylhexanoate or Stannous Octoate or Tin Octoate SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Tin (II) 2-ethylhexanoate or Stannous Octoate or Tin Octoate, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Stannous Octoate SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet 04-Feb-23

Product Name & Other Names: Stannous Octoate, Tin (II) 2-ethylhexanoate, Tin octoate, Tin (II) bis(2-ethylhexanoate).
CAS Number: 301-10-0
EINECS EC Number: 206-108-6
Molecular Formula: C16H30O4Sn or [CH3(CH2)3CH(C2H5)CO2]2Sn
Molecular Weight: 405.12
Intended Use: Oil & Gas Wells fracturing and Industrial Manufacturing.
Relevant uses and uses advised against (if any): Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin sensitization Category 1, H317
Serious eye damage Category 1, H318
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Reproductive toxicity Category 2, H361
Long-term (chronic) aquatic hazard Category 3, H412

Hazard Statements:
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H361: Suspected of damaging fertility or the unborn child.
H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P314: Get medical advice/attention if you feel unwell.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.

Product Name & Other Names: Stannous Octoate, Tin (II) 2-ethylhexanoate, Tin octoate, Tin (II) bis(2-ethylhexanoate).
CAS Number: 301-10-0
EINECS EC Number: 206-108-6

Inhalation: Remove affected person to fresh air; if normal breathing has not returned within a few minutes after exposure, get medical attention.
Skin: Remove contaminated clothing; wash affected area with soap and water; launder contaminated clothing before reuse. Seek medical attention.
Eyes: Immediately, flush eyes for 15 minutes in clear running water while holding eyelids open; seek medical attention immediately.
Ingestion: Drink two glasses of water followed by milk, milk of magnesia or other non-alcoholic liquids; Do not induce vomiting; seek medical attention immediately.
Physician may treat symptomatically.

Flash Point: > 100C
Auto Ignition Temperature: > 400C
Extinguishing Media: Carbon dioxide, water fog, dry chemical, chemical foam.
Organics may be ignitable. Keep containers cool by spraying with water. Use extinguishing media appropriate for surrounding fire.
Fire & Explosion Hazard: May evolve oxides of carbon (COx) under fire conditions. May evolve oxides of tin under fire conditions. Cool containers to prevent pressure buildup and possible explosion when exposed to extreme heat.
Unusual Fire and Explosion Hazards: Closed containers of can explode due to buildup of pressure when exposed to extreme heat.
Hazardous Combustion Products: Products of combustion include smoke, toxic fumes, oxides of carbon to include carbon monoxide, tin oxides.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Do not approach facing the wind.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents.

Engineering Controls: The use of local exhaust ventilation is recommended to control emissions near the source. Provide mechanical ventilation of confined spaces. Use corrosion-resistant, explosion-proof ventilation equipment.
Exposure Limits: ACGIH-TLV STEL: 0.2 mg/m3 Sn, TWA: 0.1 mg/m3 Sn; OSHA-PEL TWA: 0.1 mg/m3 Sn (vacated) TWA: 0.1 mg/m3 Sn (vacated).
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: Light yellow viscous liquid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.26
Melting/ Freezing Point: 9C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Soluble.
Viscosity at 25C (cPs): maximum: 380

Stability: Stable at normal temperatures and operating conditions.
Conditions to Avoid: Avoid excessively high temperatures and contact with strong oxidizing agents.
Incompatibilities: Strong Oxidizing Agent.
Decomposition: Decomposition yields carbon monoxide & dioxide, oxides of tin.
Polymerization: Polymerization will not occur.

Eye: Irritation Eye contact may be painful and irritating.
Skin: Irritation Prolonged and repeated skin exposure may be painful and irritating.
Inhalation: Toxicity Inhalation of this product during manufacturing may be irritating.
Reproduction: Not evaluated.
Mutagenicity: Not mutagenic in AMES Test or via micronucleus test on mice.
Carcinogenicity: Not listed as a human carcinogen by OSHA, IARC, ACGIH & NTP.
Acute Oral Effects: Oral LD50 – Rats 5870 mg/kg.
Acute Dermal Toxicity: Dermal LD50 – Rabbits >2000 mg/kg.
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

Toxicity to fish: semi-static test LC50 - Oncorhynchus mykiss (rainbow trout) - > 116
mg/l - 96 h.
Results of PBT and vPvB assessment: Not available.
Persistence and degradability: no data available
Bioaccumulative potential: no data available
Mobility in soil: no data available.

Dispose of in accordance with Local, State, and Federal Regulations. Consult local, state, or Federal Environmental Protection Agency before disposing of any chemicals.

DOT USA, TDG Canada & ADR/RID Europe: NOT REGULATED.
IMDG/IMO: NOT REGULATED.
ICAO/IATA: NOT REGULATED.

UNITED STATES REGULATORY INFORMATION
SARA 311/312 Hazards: Acute Health Hazard.
California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986: This product may contain a maximum of 0.09% formaldehyde known to the state of California to cause cancer.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 301-10-0, Tin (II) 2-ethylhexanoate or Stannous Octoate or Tin Octoate manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.