Disodium Phosphate, Sodium Phosphate Dibasic SDS, MSDS Sheet

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Disodium Phosphate, Sodium Phosphate Dibasic, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

SDS, MSDS of Disodium Phosphate, Sodium Phosphate Dibasic Manufacturers YOU ARE HERE

Sodium Phosphate Dibasic SDS GHS, MSDS Sheet, Material Safety Data Sheet Disodium Phosphate

Synonyms: Disodium phosphate; DSP; Disodium hydrogen phosphate, Di sodium phosphate; Sodium phosphate dibasic.
CAS No.: 7558-79-4 for Anhydrous and 10039-32-4 for Dodecahydrate
EINECS EC Number: EC Number 231-448-7
Molecular Weight: 141.96 for Anhydrous and 358.14 for Dodecahydrate
Chemical Formula: Na2HPO4 for Anhydrous and Na2HPO4.12H20 for Dodecahydrate
Recommended usage: Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Ingredient: Di Sodium Phosphate, Disodium phosphate or Sodium Phosphate Dibasic bsp;7558-79-4 98
EINECS EC Number: EC Number 231-448-7
Percent: 100%

Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give large amounts of water to drink. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.

Fire: Di Sodium Phosphate is not considered to be a fire hazard.
Explosion: Disodium phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire over Di Sodium Phosphate.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Small amounts of residue may be flushed to sewer with plenty of water. US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: It is white granular powder. Hygroscopic.
Odor: Odorless.
Solubility: Sodium phosphate dibasic is soluble in water.
Specific Gravity: 2.07 @ 15C/4C
pH: No information found.
% Volatile by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: 240C (464F) Converts to Na4P2O7

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Sodium and phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Strong acids, alkaloids, lead acetate, antipyrine, chloral hydrate, resorcinol and pyrogallol.
Conditions to Avoid: Incompatibles.

Oral rat LD50: 17 gm/kg. Skin rabbit, standard Draize, 500 mg/24H, mild. Eye rabbit, standard Draize, 500 mg/24H mild.
Carcinogenecity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC NTP ACGIH OSHA.

Aquatic toxicity: LC50 1650 mg/l (Orfe, golden (Leuciscus Idus))
Environmental Fate: No information found.
Environmental Toxicity: No information found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Disodium phosphate container and unused contents in accordance with federal, state and local requirements.

DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated

USA - TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No, Fire: No Pressure: No Reactivity: No (Pure / Solid)
Chemical Weapons Convention: No

HMIS (Perceived): Health Hazard: 1, Fire Hazard: 0, Reactivity: 0, Personal Protection: E
NFPA (Perceived): Health: 1, Flammability: 0, Reactivity: 0

Disclaimer:
******************************
Our company provides this Di SODIUM PHOSPHATE, SODIUM PHOSPHATE DIBASIC SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This DISODIUM PHOSPHATE, DIBASIC SODIUM PHOSPHATE MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
******************************

CAS Number 7558-79-4 for Anhydrous and 10039-32-4 for Dodecahydrate, Monosodium Disodium Trisodium Phosphate, Sodium Phosphate Monobasic Dibasic Tribasic manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.