Sodium Peroxide SDS MSDS Sheet of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Sodium Peroxide, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.
Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Home ---------- Contact Aadhunik Industries Ankleshwar ---------- TranslateTranslate

Sea Export Air Export Drum Packing Jumbo bag packing Liquid Chemical Packing Packing Palletized for Exports Chemical Liquid Bulk Exports
Sodium Peroxide Manufacturers

Specifications of Sodium Peroxide Manufacturers

Sodium Peroxide SDS MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product: Sodium Peroxide or Sodium superoxide
CAS No.: 1313-60-6
EINECS: EC Number: 215-209-4

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Oxidizing liquids; Oxidizing solids Category 1
Skin corrosion/irritation Category 1A, B, C

Labeling according Regulation (EC) No 1272/2008

GHS Label Elements
Oxidizer
Oxidizing Solid
GHS Label Elements
Burns
Corosive

Signal Word: Danger

Hazard Statements:
H271: May cause fire or explosion; strong oxidiser.
H314: Causes severe skin burns and eye damage.

Precautionary Statements:
P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P220: Keep/Store away from clothing/other combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P306 + P360: IF ON CLOTHING: rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P371 + P380 + P375: In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.
P362: Take off contaminated clothing and wash before reuse.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC
Hazard Symbols
: Xn = Harmful; O = Oxidizer.
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system and skin.
R 41 Risk of serious damage to eyes.
R 8 Contact with combustible material may cause fire.

3. Composition/Information on Ingredients

Product: Sodium Peroxide or Sodium superoxide
CAS No.: 1313-60-6
EINECS: EC Number: 215-209-4

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Flammability of the Product: Non-flammable but it is an oxidizer.
Products of Combustion: It emits toxic sodium oxide and oxygen when heated to decomposition.
Fire: It is supporting fire as an oxidizer.
Explosion: Contact with oxidizable substances may cause explosion.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system or as required by law.

7. Handling and Storage

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage or contact with combustible substances.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Off-white or yellowish crystals or powder or granules.
Odor: None.
Solubility: Soluble in water.
pH: 12-13,
Density: 2.8 gm/cc.
Molecular Weight: 77.98
Chemical Formula: Na2O2
% Volatile by volume @ 21C (70F): 0
Melting Point: 460C (Decomposes)

10. Stability and Reactivity

Stability: It is stable under recommended conditions of use and storage.
Hazardous Decomposition Products: It emits sodium oxides and oxygen when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Organic substances, Metal powders and Reducing agents.
Conditions to Avoid: Incompatibles moisture and heat.

11. Toxicological Information

Toxicity to Animals: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.

12. Ecological Information

Environmental Fate: No information found.
Toxicity: Not available.
Persistence and degradability: Not available.
Bioaccumulative potential: Not available.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

14. Transport Information

DOT (USA)
UN number: 1504 Class: 5.1 Packing group: I
Proper shipping name: Sodium Peroxide
IMDG
UN number: 1504 Class: 5.1 Packing group: I
Proper shipping name: Sodium Peroxide
IATA
UN number: 1504 Class: 5.1 Packing group: I
Proper shipping name: Sodium Peroxide

15. Regulatory Information

USA:
Section 313
: Not applicable.
SARA 311/312 Hazards: Acute Health Hazard, Chronic Health Hazard, Reactivity Hazard.

Section 16 - Additional Information

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 1313-60-6, Sodium Peroxide manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries

Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

Aadhunuk Industries Ankleshwar Gujarat India

Copyright and Usual Disclaimer is Applicable. 9-12-2022

Barium Chloride ------- Calcium Chloride ------- Calcium Oxide ------- Calcium Hydroxide ------- Calcium Propionate ------- Calcium D Saccharate ------- Calcium Sulfate ------- Magnesium Chloride ------- Magnesium Oxide ------- Magnesium Sulphate ------- Sodium Acetate ------- Sodium Diacetate ------- Sodium Hydroxide Pellets ------- Sodium Metabisulphite ------- Sodium Propionate ------- Sodium Thiosulfate ------- Sodium Formaldehyde Bisulfite ------- Sodium Phosphate Monobasic Dibasic Tribasic ------- Sodium Perborate ------- Zinc Chloride

Magnesium Cloride Anhydrous Powder Flakes Chips Blocks