Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Sodium Metabisulphite or Sodium Metabisulfite, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Sodium Metabisulphite or Sodium Metabisulfite Manufacturers Exporters

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Sodium Pyrosulphite
Na2S2O5
DEFINITION
Sodium metabisulphite also called sodium disulphite.
Content: 95.0 per cent to 100.5 per cent.
CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water, slightly soluble in ethanol (96 per cent).
IDENTIFICATION
A. pH 3.5 to 5.0 for solution S.
B. To 0.4 ml of iodinated potassium iodide solution R add 8 ml of distilled water R and 1 ml of solution S diluted 1 to 10 in distilled water R. The solution is colourless and gives reaction of sulphate.
C. Solution S gives reaction of sodium.
TESTS
Solution S: Dissolve 5.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
pH: 3.5 to 5.0 for solution S.
Thiosulphate: To 5 ml of solution S add 5 ml of dilute hydrochloric acid R. The solution remains clear for at least 15 min.
Arsenic: Maximum 5 ppm.
Iron: Maximum 20 ppm, determined on solution S.
Heavy metals: Maximum 20 ppm.

Na2S2O5 -- 190.11
Disulfurous acid, disodium salt.
Disodium pyrosulfite CAS 7681-57-4
Sodium Metabisulfite contains an amount of Na2S2O5 equivalent to not less than 65.0 percent and not more than 67.4 percent of SO2.
Packaging and storage: Preserve in well-filled, tight containers, and avoid exposure to excessive heat.
Identification: A solution (1 in 20) responds to the tests for Sodium and for Sulfite.
Limit of chloride: Dissolve 1.0 g in 10 mL of water, filter, if necessary, through a small chloride free filter, and add 6 mL of 30 percent hydrogen peroxide. Add 1 N sodium hydroxide until the solution is slightly alkaline to phenolphthalein, dilute with water to 100 mL, and mix. Dilute 2.0 mL of this solution with water to 20 mL, and add 1 mL of nitric acid and 1 mL of silver nitrate TS. Mix, allow to stand for 5 minutes protected from direct sunlight, and compare the turbidity, if any, with that produced from a 2-mL aliquot of a control (prepared by diluting 0.71 mL of 0.020 N hydrochloric acid to 100 mL) in an equal volume of total solution containing the quantities of reagents used in the test: any turbidity produced by the test specimen does not exceed that of the control preparation (0.05%).
Iron: the limit is 0.002%.
Limit of thiosulfate: Mix 2.2 g with 10 mL of 1 N hydrochloric acid in a 50-mL beaker. Boil gently for 5 minutes, cool, and transfer to a small test tube. Any turbidity is not greater than that produced by 0.10 mL of 0.10 N sodium thiosulfate, similarly treated (0.05%).
Heavy metals: the limit is 0.002%.

Sodium Pyrosulfite
Na2S2O5 Formula wt 190.11
INS: 223 CAS: [7681-57-4]
DESCRIPTION
Sodium Metabisulfite occurs as colorless crystals or as a white to yellow, crystalline powder. It is freely soluble in water and slightly soluble in alcohol. Its solutions are acid to litmus.
Function: Preservative; antioxidant.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Sodium and for Sulfite.
Assay: Not less than 90.0% and not more than 100.5% of Na2S2O5.
Iron: Not more than 10 mg/kg.
Lead: Not more than 2 mg/kg.
Selenium: Not more than 5 mg/kg.

Disodium Disulfite
Na2S2O5
Formula Wt 190.11
CAS Number 7681-57-4
REQUIREMENTS
Assay: min 97.0% Na2S2O5
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.05%
Thiosulfate (S2O3): 0.05%
Heavy metals (as Pb): 0.001%
Iron (Fe): 0.002%

CAS Number 7681-57-4, Sodium Metabisulphite manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.