Sodium Chlorite n Sodium Hypochlorite Powder Pentahydrate Solution USP BP Ph Eur FCC Food Grade Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Sodium Chlorite & Sodium Hypochlorite Powder Pentahydrate Solution, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

General Properties and Specifications of Sodium Chlorite 31% Solution:
Appearance: Clear or light yellowish liquid.
Odor: Faint bleach like odor.
Sodium Chlorite: 31% (1% deviation on either side) as NaClO2 (other dilutions can be offered).
Total Alkalinity: 2.5% as NaOH maximum.
Water: 55% to 62 5%
pH: 12 to 13.5
Specific Gravity: 1.27 to 1.32

Specifications of Sodium Chlorite Solutions FCC Food Grade Show/Hide Details

Acidified Sodium Chlorite Solutions FCC Food Grade:
DESCRIPTION
Acidified Sodium Chlorite (ASC) Solutions occur as clear, colorless to pale-yellow liquids. The ASC Solutions are equilibrium mixtures of sodium chlorite (NaClO2) and chlorous acid (HClO2). ASC Solutions are produced by lowering the pH of a sodium chlorite solution with a safe and suitable acid to achieve a pH within the range 2.3 to 3.9 depending on the intended use.
Function: Antimicrobial agent in processing water used to spray, dip, rinse, or store food before processing, to be followed by rinsing in potable water or by blanching, cooking, or canning; sanitizer for hard surfaces; broad-spectrum bactericide, virucide, fungicide, and sporicide.

REQUIREMENTS
Lead: Not more than 1 mg/kg.
Mercury: Not more than 1 mg/kg.
pH: Between 2.3 and 3.9.
Note: The pH is chosen depending on the application; it controls the concentration of metastable chlorous acid, which rapidly breaks down into chlorine dioxide, chloride, and in some applications, chlorate.
Caution: To minimize the evolution of hazardous chlorine dioxide gas, do not adjust the pH below 2.3.
Sodium Chlorite: Between 40 and 1200 ppm, depending on the application.

General Properties and Specifications of Sodium Chlorite 80% Powder:
Appearance: White to off-white powder, crystals, or flakes.
Odor: Faint bleach like odor.
Assay: 80% minimum as NaClO2
Total Alkalinity: 10% as NaOH maximum.

General Specifications of Sodium Hypochlorite Solution:
Available chlorine: Minimum 12.00% weight. Other Dilutions can be offered.
Specific gravity at 25C: Minimum 1.170
Total alkali as NaOH: Maximum 1.50% weight
Appearance: Colorless to Yellowish liquid
Odor: Chlorine like Odor
Boiling point: Decomposes.
Fusion point:-25 ºC (Sol. at 12% NaOCl)
Solubility in water: It is 100% soluble in water
pH: >9

Sodium Hypochlorite Solution USP Grade
NaClO --- 74.44 --- [CAS 7681-52-9].
Hypochlorous acid, sodium salt.

Sodium Hypochlorite Solution contains not less than 4.0 percent and not more than 6.0 percent, by weight, of NaClO.
Caution: This Solution is not suitable for application to wounds.

Identification:
A: The Solution at first colors red litmus blue and then bleaches it.
B: The addition of 3 N hydrochloric acid to the Solution causes an evolution of chlorine.
C: The solution obtained in Identification test B responds to the flame test for Sodium.

Specifications of Sodium Hypochlorite Pentahydrate
Available chlorine wt% (Typical value): minimum 39.0 -- (42.0)
Aqueous solution: Pale yellow transparent
NaOH wt%: 0.05
NaCl wt%: 0.12
NaClO3 wt%: 0.05
NaBrO3 wt%: 0.005
Molecular formula: NaOCl-5H2O
Molecular weight: 164.52
Density g/cc: 1.6
Melting point: 25C-27C
Stability: Stable for 1 year below 7C

CAS Number 7758-19-2 & 7681-52-9 (anhydrous), 7681-52-8 (pentahydrate), Sodium Chlorite n Sodium Hypochlorite Powder Pentahydrate Solution USP BP Ph Eur FCC Food Grade manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.