Sodium Chloride SDS MSDS Sheet of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Sodium Chloride, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

MSDS Name: Sodium Chloride
Chemical Formula: NaCl
Molecular Weight: 58.44
CAS Number: 7647-14-5
EINECS EC Code: 231-598-3
Intended use: Laboratory Chemicals and Industrial Manufacturing Use.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Chemical Name: Sodium chloride
CAS#: 7647-14-5
EINECS EC No.: 231-598-3
Percent:: 100

Always seek medical advice after the first aid treatment.
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid. Wash mouth out with water.
Inhalation: Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.

General Information: Water runoff can cause environmental damage. Dike and collect water used to fight fire. Wear appropriate protective clothing to prevent contact with skin and eyes. Wear a self-contained breathing apparatus (SCBA) to prevent contact with thermal decomposition products. Substance is noncombustible.
Extinguishing Media: For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.
Special hazards arising from the substance: Hydrogen chloride gas, Sodium oxides

General Information: Use proper personal protective equipment.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation.

Handling: Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Do not ingest or inhale.
Storage: Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from moisture.

Engineering Controls: Good general ventilation should be sufficient to control airborne levels. Facilities storing or utilizing the material should be equipped with an eyewash facility and a safety shower.
Exposure Limits: Sodium Chloride is not listed by ACGIH NIOSH & OSHA-Final PELs.
Personal Protective Equipment
Eyes: Wear safety glasses with side shields.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
Respirators: A NIOSH/MSHA approved air purifying dust or mist respirator or European Standard EN 149.

Physical State: Solid
Appearance: Colorless or white
Odor: Odorless
pH: Not available.
Boiling Point: 2575 deg F
Freezing/Melting Point:1474 deg F
Solubility: Soluble in water.
Specific Gravity/Density: 2.165
Molecular Formula: NaCl
Molecular Weight: 58.44

Chemical Stability: Stable.
Conditions to Avoid: High temperatures, exposure to moist air or water.
Incompatibilities with Other Materials: It reacts with most non-noble metals such as iron or steel, building materials (such as cement), bromine, or trifluoride. Potentially explosive reaction with dichloro-maleic anhydride + urea. Electrolysis of mixtures with nitrogen compounds may form explosive nitrogen tri-chloride.
Hazardous Decomposition Products: Toxic fumes of chlorine or hydrogen chloride and sodium oxide.
Hazardous Polymerization: Has not been reported.

LD50 Oral - Rat - 3,550 mg/kg(Sodium chloride)
LC50 Inhalation - Rat - 1 h - > 42,000 mg/m3(Sodium chloride)
LD50 Dermal - Rabbit - > 10,000 mg/kg(Sodium chloride)
Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Epidemiology: No information reported.
Teratogenic: An experimental teratogen.
Neurotoxicity: No information reported

Toxicity to fish: LC50 - Lepomis macrochirus (Bluegill) - 5,840 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates:
NOEC - Daphnia (water flea) - 1,500 mg/l - 7 d(Sodium chloride)
LC50 - Daphnia magna (Water flea) - 1,661 mg/l - 48 h(Sodium chloride)
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.

DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADR/RID: Not dangerous goods

USA Regulations:
SARA 302 Components: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This SDS or MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

CAS Number 7647-14-5, Sodium Chloride IP BP USP ACS manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.