Sodium Bromide SDS, MSDS Sheet

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Sodium Bromide, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May Causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Call a physician.
Skin Contact: In case of contact with Sodium Bromide, immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Call a physician.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
Special hazards arising from the substance or mixture: Hydrogen bromide gas, Sodium oxides

Ventilate area of leak or spill of Sodium Bromide. Wear appropriate personal protective equipment.
Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Do not let product enter drains.

Hygroscopic. Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

Airborne Exposure Limits: None established for Sodium Bromide.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: Sodium Bromide is white crystals, granules, or powder.
Odor: Odorless.
Solubility: Sodium Bromide solubility is 116 g/l00 g water @ 50C (122F)
Specific Gravity: 3.21 for Sodium Bromide.
pH: 5,4 at 50 g/l at 20 °C.
% Volatile by volume @ 21C (70F): 0
Boiling Point: 1390C (2534F)
Melting Point: 755C (1391F)

Stability: Stable under ordinary conditions of use and storage. Absorbs moisture from air.
Hazardous Decomposition Products: Oxides of the contained metal and halogen, possibly also free, or ionic halogen.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, alkaloidal and heavy metal salts, oxidizers, and bromine trifluoride.
Conditions to Avoid: Moisture and incompatibles.

LD50 Oral - Rat - 3.500 mg/kg
LD50 Dermal - Rabbit - > 2.000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.

Toxicity to fish: mortality NOEC - Oryzias latipes - 7.800 mg/l - 96 h
LC50 - Poecilia reticulata (guppy) - 160.000 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: mortality NOEC - Daphnia magna (Water flea) - 7.800 mg/l - 48 h
EC50 - Daphnia magna (Water flea) - 5.800 mg/l - 48 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of Sodium Bromide container and unused contents in accordance with federal, state and local requirements.

DOT (US): Not dangerous goods
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods

USA SARA 311/312: None
SARA 313: Not applicable
CERCLA: Not applicable
California Proposition 65: This product does not contain any Proposition 65 chemicals

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

CAS Number 7647-15-6, Sodium Bromide manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.