Pyrrolidone SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturer and exporter of 2-Pyrrolidone or 2-Pyrrolidinone or Butyrolactam or Aminobutyrolactam or 2-Ketopyrrolidine, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

2-Pyrrolidone or 2-Pyrrolidinone or Butyrolactam or Aminobutyrolactam or 2-Ketopyrrolidine SDS, Safety Data Sheet
MSDS Sheet, Material safety Data Sheet

Product Name & Other Names: 2-Pyrrolidone or 2-Pyrrolidinone or Butyrolactam or Aminobutyrolactam or 2-Ketopyrrolidine.
CAS No.: 616-45-5
EINECS: EC Number: 210-483-1
Relevant uses and uses advised against (if any): Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Hazard statements:
H319 Causes serious eye irritation.
H360D May damage the unborn child.

Precautionary statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink, or smoke when using this product.
P280 Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+313: IF exposed or concerned: Get medical advice/attention.
P501: Dispose of contents/container to an authorized agent only.

Product Name & Other Names: 2-Pyrrolidone or 2-Pyrrolidinone or Butyrolactam or Aminobutyrolactam or 2-Ketopyrrolidine.
CAS No.: 616-45-5
EINECS: EC Number: 210-483-1

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.

Flammability of the Product: It is an organic material. Flash point: 129C literature. Forms explosive mixtures with air on intense heating.
Products of Combustion: It emits Carbon oxides, Nitrogen oxides and fumes when heated to decomposition.
Fire Extinguishing Media: Water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Eliminate all sources of ignition. Avoid dust-mist formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled material in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Eliminate all sources of ignition. Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, strong bases, strong reducing agents.

Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Colorless to light yellow solid or liquid depending on temperature.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: around 1.12
Boiling Point: 245C literature.
Melting Point: 23C-25C literature.
Flash Point: 129C literature.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water, benzene, ethanol etc.
Viscosity: Not available.

Stability: Stable under ordinary conditions of use and storage. Hygroscopic, Air sensitive, Light sensitive. Forms explosive mixtures with air on intense heating.
Hazardous Decomposition Products: It emits Carbon oxides, Nitrogen oxides and fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Strong acids, Strong bases, Strong reducing agents, Heat.
Conditions to Avoid: Moisture, Heat, Incompatibles.

Toxicity to Animals:
ORAL (LD50): >2000 mg/kg (Rat).
Dermal LD50 = >2 g/kg (Rabbit).
Inhalation LC50: 8 h – 0.061 mg/l (Rat)
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Damage to fetus possible(N-methyl-2-pyrrolidone).

Environmental Toxicity:
Toxicity to fish: static test LC50 Danio rerio (zebra fish): > 4,600 mg/l; 96 h
Toxicity to daphnia and other aquatic invertebrates: static test EC50 Daphnia magna (Water flea): > 500 mg/l; 48 h.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options.

DOT USA, TDG Canada & ADR/RID Europe: Not regulated
IMDG/IMO: Not regulated
IATA: Not regulated.

USA:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: Not listed.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 616-45-5, Pyrrolidone manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.