PAPB Polyaminopropyl Biguanide or PHMB Polyhexamethylene SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturer and exporter of PAPB Polyaminopropyl Biguanide or PHMB Polyhexamethylene, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Polyaminopropyl Biguanide SDS GHS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 23-April-25

Product Name & Other Names: Polyamine-propyl-biguanidine or PAPB or polyhexamethylene biguanide or PHMB or Polyaminopropyl Biguanide.
CAS No.: 133029-32-0 also 32289-58-0 or 70170-61-5 or 28757-47-3 are reported.
EINECS: EC Number: NA

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319
Specific target organ toxicity, single exposure; Respiratory tract irritation Category 3, H335
Acute aquatic toxicity Category 1, H400

Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
H400: Very Toxic to aquatic life.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.

Product Name & Other Names: Polyaminopropyl Biguanide.
CAS No.: 133029-32-0 also 32289-58-0 or 70170-61-5 or 28757-47-3 are reported.
Percent: Diluted as per buyers order.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Flammability of the Product: May be combustible at high temperature.
Products of Combustion: Nitrogen oxide, Carbon dioxide, Carbon monoxide, fumes.
Fire Extinguishing Media: Use means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Avoid solid water jet as it can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes. On decomposition it may emit hydrogen chloride. Containers may explode on heating.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Avoid touching the spilled material. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Do not contaminate the environment.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Provide appropriate exhaust ventilation at places where dust is formed. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, reducing agents.

Airborne Exposure Limits: Not Established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures low.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Colorless to pale yellow. In its neat form, is a solid/powder.
Odor: No information found.
Odor threshold: No information found.
pH: No information found.
Relative density: No information found.
Melting point/freezing point: No information found.
Boiling Point: No information found.
Flash Point: No information found.
Auto-ignition temperature: No information found.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor density: No information found.
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: Soluble in water.
Viscosity: No information found.

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits Nitrogen oxide, Carbon dioxide, Carbon monoxide & Fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, reducing agents.
Conditions to Avoid: Incompatibles and extremely low or high temperature.

Toxicity data
LD50 Oral - Rat - > 2,000 mg/kg.
LD50 Dermal - Rat - > 2,000 mg/kg.
Carcinogenic Effects: No component of this product at levels greater than 0.1% is identified as carcinogenic by IARC, ACGIH, or OSHA.
Mutagenic Effects: No information found.
Teratogenic Effects: No information found.
Developmental Toxicity: No information found.

Toxicity to fish: No information found.
Persistence and degradability: Unlikely to persist.
Mobility in soil: Likely to be mobile due to water solubility.
Products of Biodegradation: Hazardous short term degradation products are not likely. However, long term degradation products may arise.
Results of PBT and vPvB assessment: No information found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility.

Land Transport DOT USA, TDG Canada & ADR/RID Europe:
UN number: 3082
UN proper shipping name: Environmentally hazardous substance, N.O.S. (Poly(hexamethylenebiguanide)
Transport hazard class(es): 9
Packaging group: III.
Sea Transport IMDG/IMO:
UN number: 3082
UN proper shipping name: Environmentally hazardous substance, N.O.S. (Poly(hexamethylenebiguanide)
Transport hazard class(es): 9
Packaging group: III.
Air Transport IATA/ICAO:
UN number: 3082
UN proper shipping name: Environmentally hazardous substance, N.O.S. (Poly(hexamethylenebiguanide)
Transport hazard class(es): 9
Packaging group: III.

USA:
SARA 311/312 Hazards: Acute health hazard.
California Prop. 65 Components: Not listed.

DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This SDS MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. In no case shall our company be liable to loss or damages by the product user.

CAS Number 133029-32-0 or 32289-58-0 or 70170-61-5 or 28757-47-3, PAPB Polyaminopropyl Biguanide or PHMB Polyhexamethylene manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.