Phenyl Mercuric Nitrate SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Phenyl Mercuric Nitrate Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Phenyl Mercuric Nitrate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

Product Name & Other Names: Phenyl mercuric nitrate, Mercury phenyl nitrate.
Chemical Formula: C6H5HgNO3·C6H5HgOH
Molecular Weight: 634.40
CAS No.: 8003-05-2
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
Sensitization, Skin (Category 1) H317
Acute toxicity, Inhalation (Category 3), H331
Chronic aquatic toxicity (Category 2), H411

Hazard statements:
H301 Toxic if swallowed.
H314 Causes severe skin burns and eye damage.
H372 Causes damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P363: Wash contaminated clothing before reuse.
P391: Collect spillage.
P405: Store locked up.
P403+233: Store in a well-ventilated place. Keep container tightly closed.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
N = Dangerous for the environment
T+ = Very toxic
C = Corrosive
Risk Phrases:
R28 = Very toxic if swallowed.
R35 = Causes severe burns
R43 = May cause sensitization by skin contact.
R51/53 = Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin: Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes: Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation: Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance/ mixture: Mercury oxides, nitrogen oxides, carbon oxides and fumes.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Avoid dust formation. Avoid breathing vapors, mist or dust. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Use clean non-sparking tools to collect material and place it into loosely covered plastic containers for later disposal.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Avoid prolonged or repeated exposure. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids and strong oxidizing agents.

Exposure Limits for Phenyl Mercuric Nitrate:
USA. NIOSH Recommended Exposure Limits: 0.05mg/m3 TWA.
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles.
Skin: Wear appropriate protective gloves.
Respiratory System: Approved or certified respirators.
Other Protective Equipments: Overalls or similar protective apparel, clean up facilities.
Don't eat, drink or smoke in work areas. Wash hands thoroughly after handling this material.

Physical State: Phenyl Mercuric Nitrate is powdered solid
Appearance: Off-white Solid.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Melting point/freezing point: Melting point/range: 175 - 185C
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Chemical Formula: C6H5HgNO3·C6H5HgOH
Molecular Weight: 634.40

Chemical Stability: Phenyl Mercuric Nitrate is stable under normal temperatures and pressures.
Incompatibility (Materials to Avoid): Strong acids and strong oxidizing agents.
Conditions to Avoid: Incompatible materials, exposure to moist air or water, excessive heat.
Hazardous Decomposition Products: Mercury oxides, nitrogen oxides, carbon oxides and fumes.
Hazardous Polymerization: Will not occur.

Toxicity to Animals: LD50 Oral - Rat - 56 mg/kg.
Carcinogenicity: Not listed as a suspected/confirmed carcinogen by NTP, OSHA and IARC.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

Toxicity to fish: Not available
Ecotoxicity: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Environmental Precautions: DO NOT DISCHARGE into drains and rivers.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Dispose of in accordance with all applicable local, state and federal regulations at an approved waste disposal facility.

DOT (USA):
UN-No UN 1895
Proper Shipping Name: Phenylmercuric Nitrate
Hazard Class 6.1; Packing Group II
IMDG/IMO
UN-No UN 1895
Proper Shipping Name: Phenylmercuric Nitrate
Hazard Class 6.1; Packing Group II
IATA:
UN-No UN 1895
Proper Shipping Name: Phenylmercuric Nitrate
Hazard Class 6.1; Packing Group II
ADR/RID:
UN-No UN 1895
Proper Shipping Name: Phenylmercuric Nitrate
Hazard Class 6.1; Packing Group II

USA:
SARA 311/312 Hazards: Acute Health Hazard, Chronic Health Hazard
California Prop. 65 Components: WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. CAS-No.: 8003-05-2

H300 Fatal if swallowed.
H314 Causes severe skin burns and eye damage.
H372 Causes damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.
N = Dangerous for the environment
T+ = Very toxic
C = Corrosive
R28 = Very toxic if swallowed.
R35 = Causes severe burns
R43 = May cause sensitization by skin contact.
R51/53 = Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

CAS Number 8003-05-2 or 55-68-5, Phenyl Mercuric Nitrate BP USP NF manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

GHS Label Elements Aquatic Toxicity	GHS Label Elements Toxic
GHS Label Elements Health Hazard	GHS Label Elements Corrosive