Phenethyl alcohol or 2-phenylethanol SDS MSDS of Manufacturers

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Phenethyl alcohol or 2-phenylethanol, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

1. Product Identification
Synonyms: 2-phenylethanol or Benzyl carbinol.
CAS No.: 60-12-8
EINECS EC Number: 200-456-2
Molecular Weight: 122.16
Chemical Formula: C8H10O
FEMA Number: 2858
Recommended usage: Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Hazard statements:
H302: Harmful if swallowed.
H319: Causes serious eye irritation.

Precautionary statements:
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Xn Harmful R22, R36
For the full text of the H-statements & R-phrases mentioned in this Section, see Section 16.

Ingredient: Phenethyl alcohol
Synonyms: 2-phenylethanol or Benzyl carbinol.
CAS No.: 60-12-8
EINECS EC Number: 200-456-2
Percent: 97 - 100%

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Flammability of the Product: Combustible at high temperature. Vapors can travel to a source of ignition and flash back.
Flash Points: 102C Closed Cup.
Flammable Limits: Not available.
Products of Combustion: Fumes, Carbon dioxide & Carbon Monoxide.
Fire: It is flammable on heating.
Explosion: Expslosive on heating.
Fire Extinguishing Media: Use means suitable for extinguishing surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes. On decomposition it may emit carbon monoxide. Containers may explode on heating

Small Spill: Absorb with an inert material and put the spilled material in an appropriate waste disposal.
Large Spill: Avoid touching the spilled material. Do not let the product enter drains. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. Do not contaminate water sources or sewer. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. Do not use combustible materials such as sawdust. Provide ventilation.

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Keep away from heat, sun light and oxidizing agents.

Airborne Exposure Limits: Not Specified.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: It is colorless to yellowish liquid.
Odor: Strong typical floral.
Solubility: It is slightly soluble in water.
pH: NA
Specific Gravity: 1.02
Molecular Weight: 122.16
Molecular Formula: C6H5CH2CH2OH
% Volatiles by volume @ 21C (70F): -
Boiling Point: 219C - 221C
Melting Point: -27C

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits carbon monoxide & fumes when heated to decomposition. It may form harmful gases.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, acids, strong bases.
Conditions to Avoid: Incompatible materials, light, dust generation, excess heat.

Acute toxicity
Harmful if swallowed. Harmful if inhaled. Irritating to skin.

Toxicity data
LD50 Oral - Rat - 1,790 mg/kg(2-Phenylethanol)
LD50 Dermal - Rabbit - 2,535 mg/kg(2-Phenylethanol)

Carcinogenicity: Not listed as a suspected/confirmed carcinogen by ACGIH, IARC, NTP, OSHA.
Developmental Toxicity: Adverse reproductive effects have occurred in experimental animals.

Toxicity to fish:
Freshwater Fish: LC50=220-460 mg/L 96 h
Water Flea: EC50=287.17mg/L 48 h
Freshwater Algae: EC50=490mg/L 72 h
Environmental Fate: This substance is expected to have a high biological oxygen demand. It is readily biodegradable and has low bioconcentration potential.
BOD5 and COD: Not available. This substance is expected to have a high biological oxygen demand.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

US DOT Classification:
Not regulated.
Canada TDG Classification:
Not regulated.
IATA
Not regulated.
ADR/RID
Not regulated.

USA:
TSCA: Listed
SARA 313: Not applicable
SARA 311/312: Hazardous Categorization: Acute Health Hazard

H302 = Harmful if swallowed.
H319 = Causes serious eye irritation.
Xn Harmful
R22 Harmful if swallowed.
R36 Irritating to eyes.
Safety Phrases:
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

CAS Number 60-12-8, Phenethyl alcohol or 2-phenylethanol manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.