Oleic Acid SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Oleic Acid, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Synonym: cis-9-Octadecenoic acid, Elainic acid
CAS Number: 112-80-1
EINECS: EC Number: 204-007-1
Molecular Formula: CH3(CH2)7CH=CH(CH2)7COOH
Molecular Weight: 282.46

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Skin irritation Category 2
Eye irritation Category 2B

Hazard statements:
H315: Causes skin irritation.
H320: Causes eye irritation

Precautionary statements:
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.P362: Take off contaminated clothing and wash before reuse.

Ingredient: Oleic Acid
CAS Number: 112-80-1
EINECS: EC Number: 204-007-1
Molecular Formula: CH3(CH2)7CH=CH(CH2)7COOH
Molecular Weight: 282.46

Always seek medical attention after first aid measures are provided.
Inhalation: If Oleic Acid is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine mist/dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Absorb and/or contain spill with inert material, then place in suitable container. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition sources.

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Oleic Acid may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust and/or static electricity. Empty only into inert or non-flammable atmosphere. Emptying contents into a non-inert atmosphere where flammable vapors may be present could cause a flash fire or explosion due to electrostatic discharge.

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: It is white to yellow liquid.
Odor: Characteristic.
Solubility: Insoluble in water.
Density: 0.89 g/cm3 at 25C (77F)
pH: 1.0 - 2 at 150 g/l at 25C (77F).
% Volatile by volume @ 21C (70F): 0
Boiling Point: 286C (547F) lit. Different reporting also observed.
Melting Point: 7 - 14C.
Flash point 189C (372F): closed cup
Vapor Density (Air=1): -
Molecular Formula: CH3(CH2)7CH=CH(CH2)7COOH
Molecular Weight: 282.46

Stability: Oleic Acid is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizers and bases.
Conditions to Avoid: Direct sunlight. Extremely high or low temperatures, Heat, dusting and incompatibles.

Acute toxicity:
LD50 Oral - Rat - 74.000 mg/kg
LD50 Dermal - rat - > 2,000 mg/kg
LD50 Intravenous - Rat - 2,4 mg/kg
LD50 Intraperitoneal - Mouse - 282 mg/kg
LD50 Intravenous - Mouse - 230 mg/kg

--------\Cancer Lists\---------------- --------------
---------------- NTP Carcinogen---
Ingredient ----- Known -- Anticipated -- IARC Category
---------------- -------- ----------- -- -------------
Oleic Acid --- No ----- No -------- -- None
(88-99-3)

Toxicity to fish LC50 - Pimephales promelas (fathead minnow) - 205 mg/l - 96 h
LC0 – fish 100 mg/l
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Environmental Fate: Sufficient information is not available. When released into the soil, Oleic Acid is expected to leach into groundwater. When released into the soil, this material is expected to biodegrade. When released into water, this material is expected to biodegrade. This material is not expected to significantly bio accumulate.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Oleic Acid in accordance with legal requirements.

SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

CAS Number 112-80-1, Oleic Acid manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.