Manganese Chloride Tetrahydrate & Manganese Chloride Anhydrous MSDS Sheet
Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Manganese Chloride Tetrahydrate & Manganese Chloride Anhydrous, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc. Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required. ---------- ---------- Translate
Manganese Chloride Manufacturers
Manganese Chloride MSDS Sheet, Manganese Chloride Tetrahydrate Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
Product Name: Manganese Chloride Tetrahydrate
CAS#: 13446-34-9
RTECS: OO9625000
TSCA: TSCA 8(b) inventory: Manganese chloride tetrahydrate
Chemical Formula: MnCl2.4H2OSection 2: Composition and Information on Ingredients
Composition: Manganese chloride tetrahydrate
CAS #: 13446-34-9
% by Weight – 100%Section 3: Hazards Identification
Potential Acute Health Effects: Manganese Chloride is very hazardous in case of ingestion. Hazardous in case of skin contact (irritant), of eye contact (irritant), of inhalation. Slightly hazardous in case of skin contact (permeator).
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available.
MUTAGENIC EFFECTS: Not available.
TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available.
The substance is toxic to lungs, the nervous system, mucous membranes.
Repeated or prolonged exposure to the substance can produce target organs damage.Section 4: First Aid Measures
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention.
Serious Skin Contact: Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek immediate medical attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Ingestion: Do not induce vomiting. Examine the lips and mouth to ascertain whether the tissues are damaged, a possible indication that the toxic material was ingested; the absence of such signs, however, is not conclusive. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
Fire Fighting Media and Instructions: Not applicable.Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.Section 7: Handling and Storage
Precautions: Do not ingest Manganese Chloride. Do not breathe dust. Wear suitable protective clothing In case of insufficient ventilation, wear suitable respiratory equipment If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes.
Storage: No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be sure that it is not necessary to strain to reach materials, and that shelves are not overloaded.Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: TWA: 1 STEL: 3 (mg/m3) from ACGIH.Section 9: Physical and Chemical Properties
Physical State: Manganese Chloride is solid
Appearance: red
Odor: none reported
pH: 5.5
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Evaporation Rate: Not applicable.
Viscosity: Not applicable.
Boiling Point: 1190 deg C; 2174 deg F
Melting Point: 58 deg C
Decomposition Temperature: > 100 deg C
Solubility: 72%
Specific Gravity/Density:2.977 @ 25C
Molecular Formula: MnCl2
Molecular Weight:125.844Section 10: Stability and Reactivity Data
Stability: Manganese Chloride is stable.
Instability Temperature: Not available.
Conditions of Instability: Not available.
Incompatibility with various substances: Not available.
Corrosivity: Non-corrosive in presence of glass.
Polymerization: No.Section 11: Toxicological Information
Routes of Entry: Eye contact. Inhalation. Ingestion.
Toxicity to Animals: Acute oral toxicity (LD50): 1454 mg/kg [Rat].
Chronic Effects on Humans: The substance is toxic to lungs, the nervous system, mucous membranes.
Other Toxic Effects on Humans:
Very hazardous in case of ingestion.
Hazardous in case of skin contact (irritant), of inhalation.
Slightly hazardous in case of skin contact (permeator).
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Animal embryo toxic.Section 12: Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation: Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The products of degradation are more toxic.
Special Remarks on the Products of Biodegradation: Not available.Section 13: Disposal Considerations
Waste Disposal: To be done as per legal requirement.
Section 14: Transport Information
DOT Classification: Not a DOT controlled material (United States).
Identification: Not applicable.
Special Provisions for Transport: Not applicable.Section 15: Other Regulatory Information
USA Federal and State Regulations:
Pennsylvania RTK: Manganese chloride tetrahydrate
Massachusetts RTK: Manganese chloride tetrahydrate
TSCA 8(b) inventory: Manganese chloride tetrahydrate
SARA 313 toxic chemical notification and release reporting: Manganese chloride tetrahydrate
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
WHMIS (Canada): CLASS D-2A: Material causing other toxic effects (VERY TOXIC).
DSCL (EEC):
R22- Harmful if swallowed.
R36/38- Irritating to eyes and skin.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: E
National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 0
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves.
Lab coat.
Dust respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate.
Splash goggles.Section 16: Other Information
Disclaimer:
*******************************
Our company provides this Manganese Chloride MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Manganese Chloride MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
*******************************CAS Number 13446-34-9, Manganese Chloride Tetrahydrate & Manganese Chloride Anhydrous manufacturers suppliers exporters at:
manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.e-mail: info@aadhunikindustries.com
Copyright and Usual Disclaimer is Applicable. 7-12-2022
Aluminum Chloride ------- Ammonium Chloride-------Ammonium Persulfate------- Ammonium Phosphate Monobasic or Dibasic or Monoammonium Diammonium Phosphate------- Barium Chloride------- Calcium Chloride------- Calcium Oxide------- Calcium Hydroxide------- Calcium Propionate------- Calcium D Saccharate------- Calcium Sulfate------- Chromic Chloride------- Citric Acid------- Copper Chloride-------HEDP------- Isatoic Anhydride------- Magnesium Chloride------- Maleic Acid------- Manganese Chloride------- Potassium Chloride------- Sodium Acetate------- Sodium Diacetate------- Potassium & Sodium Propionate ------- Sodium Thiosulfate------- Sodium Formaldehyde Bisulfite------- Sulfamic Acid------- Zinc Chloride