Pyrites and Iron sulfide Ferrous sulfide Sticks Powder Lumps SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Pyrites and Iron sulfide Ferrous sulfide Sticks Powder Lumps, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Iron Sulphide or Ferrous Sulfide SDS GHS, Safety Data Sheet
MSDS Sheet Material Safety Data Sheet

Product Name & Other Names: Iron Sulphide or Ferrous Sulfide
CAS#: 1317-37-9
EINECS/ELINCS: 215-268-6
Molecular Formula: FeS
Molecular Weight: 87.907
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead above.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Chemical Name: Iron Sulphide or Ferrous Sulfide
CAS#: 1317-37-9
EINECS/ELINCS: 215-268-6

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin: Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.

General Information: For Ferrous sulfide, as in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: For small fires over Iron Sulphide, use water spray, dry chemical, carbon dioxide or chemical foam.
Flash Point: Not applicable.
Upper: Not available.

Personal precautions, protective equipment and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Vacuum or sweep up and remove to an approved disposal container.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat or smoke while handling. Avoid contact with skin, eyes and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong acids and oxidizing agents.

Engineering Controls: For Iron Sulphide or Ferrous sulfide use adequate ventilation to keep airborne concentrations low.
Exposure Limits
WEL: Short-term value: 2 mg/m³; Long-term value: 1 mg/m³ as Fe
ACGIH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
NIOSH: 1 mg/m3 TWA (as Fe) (listed under Iron salts (soluble)
OSHA - Final PELs: None listed
OSHA Vacated PELs: Iron (II) Sulfide: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Appearance: Iron Sulphide or Ferrous sulfide is gray to brown black solid.
Odor: None reported
Odor threshold: Not available.
pH: Not available.
Relative density: 2
Boiling Point: Decomposes.
Freezing/Melting Point: 1194 deg C
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: It is insoluble in water.
Viscosity: Not available.
Molecular Formula: FeS
Molecular Weight: 87.907

Chemical Stability: Iron Sulphide or Ferrous sulfide is stable under normal temperatures and pressures.
Conditions to Avoid: Moisture, exposure to air, strong oxidants.
Incompatibilities with Other Materials: Strong acids.
Hazardous Decomposition Products: Oxides of sulfur, hydrogen sulfide.
Hazardous Polymerization: Has not been reported for Iron Sulphide or Ferrous sulfide.

LD50 Oral - Rat - female: > 2.000 mg/kg
LD50 Dermal - Rat - male and female: > 2.000 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Teratogenic: No data available.
Mutagenic: No data available.

LC50-Gambusia affinis (Mosquito fish): > 10.000 mg/l – 96.0 h
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.

DOT & ADR/RID: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated

USA:
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.

CAS Number 1317-37-9, Pyrites and Iron sulfide Ferrous sulfide Sticks Powder Lumps manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.