Glyceryl Palmitostearate or Glycerol Palmitostearate FCC Food Grade Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Glyceryl Palmitostearate or Glycerol Palmitostearate, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Specifications of Glyceryl Palmitostearate or Glycerol Palmitostearate Properties Show/Hide Details

General Properties and Specifications of Glyceryl Palmitostearate:
Appearance: White powder.
Melting point: 50C to 60C literature.
Boiling point: 359C to 360C literature.
Flash point: 162C literature.
Heavy metal: 10 ppm maximum.

Specifications of Glyceryl Palmitostearate or Glycerol Palmitostearate FCC Food Grade Show/Hide Details

Glyceryl Palmitostearate FCC Food Grade:

DESCRIPTION
Glyceryl Palmitostearate occurs as a fine powder or waxy solid. It is a mixture of fatty acid glycerides, primarily glyceryl esters of palmitic and stearic acids. The waxy solid melts at about 55°. Glyceryl Palmitostearate is soluble in chloroform, but practically insoluble in water and in alcohol.
Function: Emulsifier

REQUIREMENTS
Identification: Transfer about 100 mg of sample into a small, conical flask fitted with a suitable reflux condenser. Transfer 50 mg each of USP Palmitic Acid Reference Standard and USP Stearic Acid Reference Standard into a similar flask to serve as the Standard Solution. Treat the contents of each flask as follows: Add 5.0 mL of a solution prepared by dissolving 14 g of boron trifluoride in methanol to make 100 mL [commercial reagent, 14% w/v, may be used (Applied Science, or equivalent)]. Swirl to mix, and reflux for 15 min. Cool, transfer the reaction mixture with the aid of 10mLof chromatographic grade hexane to a 60-mL separator, and add 10 mL of water and 10 mL of saturated sodium chloride solution. Shake, allowthe mixture to separate, then drain and discard the lower, aqueous layer. Pass the hexane layer through 6 g of anhydrous sodium sulfate into a suitable flask. Concomitantly introduce a 1-_L to 2-_L portion of the filtered hexane solution from each of the two flasks into a gas chromatograph, or equivalent, and obtain the chromatograms. Use a gas chromatograph, or equivalent, equipped with a flame-ionization detector and a 1.5-m × 3-mm (id) column packed with 15% diethylene glycol succinate polyester on flux-calcined, acid-washed siliceous earth. Maintain the column at 165C. Set the temperatures of the inlet port and the detector to 210C. Use helium as the carrier gas. The retention times of the main peaks of methyl palmitate and methyl stearate obtained in the Sample Solution chromatogram correspond to those of the main peaks obtained from the Standard Solution. The ratio of the response of the main peaks to the sum of all the responses is between 0.42 and 0.55 for methyl palmitate, and between 0.43 and 0.55 for methyl stearate.

CAS Number 8067-32-1, Glyceryl Palmitostearate or Glycerol Palmitostearate FCC Food Grade manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.