Glutaraldehyde SDS GHS of Manufacturers Exporters
Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Glutaraldehyde, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc. Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required. ---------- ---------- Translate
Specifications of Glutaraldehyde Manufacturers
Glutaraldehyde Glutaral Concentrate Glutaric acid dialdehyde
SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet1. Product Identification
Product Name & Other Names: Glutaraldehyde Glutaral Concentrate Glutaric acid dialdehyde.
CAS No.: 111-30-8
EINECS EC Code: 203-856-5
Molecular Weight: 100.12 for un-diluted material.
Chemical Formula: CH2(CH2CHO)2 for un-diluted material.
Relevant uses and uses advised against (if any): Oil & Gas Wells fracturing and Industrial Manufacturing.2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008Acute toxicity, Oral (Category 4), H302
Skin corrosion (Sub-category 1B), H314
Acute toxicity, Inhalation (Category 3), H331
Skin sensitization (Category 1), H317
Respiratory sensitization (Category 1) H334
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
Long-term (chronic) aquatic hazard (Category 1), H410Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
ToxicGHS Label Elements
CorrosiveGHS Label Elements
Health HazardGHS Label Elements
Marine PollutantSignal Word: Danger
Hazard Statements:
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction
H331: Toxic if inhaled
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H410: Very toxic to aquatic life.Precautionary Statements
P220: Keep/Store away from clothing/other combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P234 Keep only in original container.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash ... thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace
P273 Avoid release to the environment.
P280-Wear protective gloves/protective clothing/eye protection/face protection.
P284 Wear respiratory protection.
P301+P310+330: IF SWALLOWED: Rinse mouth and immediately call a POISON CENTER or doctor/physician.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P304 + P341 + P311 IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P314: Get Medical advice/attention if you feel unwell.
P330: If swallowed, rinse mouth.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P363: Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
T = Toxic
C = Corrosive
N = Dangerous for the environment
Risk Phrases:
R22 Harmful if swallowed.
R23 = Toxic by inhalation.
R34 Causes burns.
R37 Irritating to respiratory system.
R41 Risk of serious damage to eyes.
R42 May cause sensitization by inhalation.
R43 May cause sensitization by skin contact.
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.3. Composition/Information on Ingredients
Product Name & Other Names: Glutaraldehyde Glutaral Concentrate Glutaric acid dialdehyde.
CAS No.: 111-30-8
EINECS EC Code: 203-856-5
Percentage: 50% to 70%4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If Glutaraldehyde is inhaled, it will cause irritation and damage to nose and throat. It can cause headache, bleeding from nose coughing and chest discomfort. Remove the victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: It will cause irritation and burns to mouth, digestive tract and stomach. It may lead to pain, nausea, vomiting, and even collapse. Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: On contact, it can cause itching, pain, swelling and redness. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: It can cause severe damage to eyes. Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.5. Fire Fighting Measures
Fire: Flash point: NA.
Auto ignition temperature: NA
Toxic fumes, carbon dioxide and carbon monoxide may be formed in fire.
Fire Extinguishing Media: Dry chemical, foam or carbon dioxide and water spray jet.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Avoid mist formation. Keep away from heat. Keep away from sources of ignition. The concentration of Glutaraldehyde can be brought down by neutralizing with 1.25 moles of Diammonium Phosphate. Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Store protected from heat, sparks and ignition sources and incompatible materials. Do not store with incompatible materials like metals, strong acids & alkalis, oxidizing & reducing agents. Do not allow to freeze. Avoid contact. Do not store near food items or near Diammonium Phosphate.8. Exposure Controls/Personal Protection
Airborne Exposure Limits: TWA: Long term (8 hours) & Short term(15 minutes) WEL is 0.05 ppm.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible.
Other Control Measures: Maintain good housekeeping in work area. Maintain eye wash fountain and quick-drench facilities in work area.9. Physical and Chemical Properties
Appearance: Colorless liquid.
Odor: Typical aldehyde smell.
Odor threshold: Not available.
pH: Not available.
Relative density: 1.025 approximate.
Melting point/freezing point: Not available.
Boiling Point: >100C
Flash point: Not available.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility: miscible with water
Viscosity: No data found.10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide and toxic fumes may form when heated to decomposition.
Hazardous Polymerization: Not likely to happen.
Incompatibilities: Metals, strong acids & alkalies, oxidizing & reducing agents, heat and sparks.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.11. Toxicological Information
Oral rat LD50: 134 mg/kg.
Carcinogenicity: Not listed as a human carcinogen by IARC, ACGIH, OSHA and NTP.
Teratogenic Effects: No data found.
Mutagenic Effects: No data found.
Developmental Toxicity: No data found.
Reproductive Effects: No data found.12. Ecological Information
Environmental Toxicity: Toxic to fish and aquatic life.
Persistence and Degradability: The product is easily biodegradable.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: No data found.
Results of PBT and vPvB assessment: No data found.13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe
UN Number: 2922
Proper shipping name: Corrosive liquid, acidic, organic. NOS (contains glutaraldehyde)
Class: 8 (6.1), Packing group: II
IMDG/IMO & IATA/ICAO
UN Number: 2922
Proper shipping name: Corrosive liquid, acidic, organic. NOS (contains glutaraldehyde)
Class: 8 (6.1), Packing group: II.15. Regulatory Information
USA:
SARA 311/312: See section 2.
California Prop 65: Not listed.Section 16 - Additional Information
European Labeling in Accordance with EC Directives:
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction
H331: Toxic if inhaled
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H410: Very toxic to aquatic life.DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
CAS Number 111-30-8, Glutaraldehyde FCC Food Grade BP Ph Eur USP Grade manufacturers suppliers exporters at:
manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.e-mail: info@aadhunikindustries.com
Copyright and Usual Disclaimer is Applicable. 6-12-2022
Acetic Acid Glacial ------- Ammonium Bicarbonate ------- Aluminum Chloride ------- Aluminium Potassium Sulphate ------- Ammonium Carbonate ------- Ammonium Carbamate ------- Ammonium Chloride ------- Ammonium Persulfate------- Barium Chloride ------- Benzyl Alcohol ------- Benzoic Acid ------- Boric Acid ------- Borax ------- Calcium Chloride ------- Calcium Oxide ------- Calcium Hydroxide ------- Calcium Lactobionate ------- Calcium D Saccharate ------- Calcium Sulfate ------- Carbamide Peroxide ------- Chromic Chloride -------Copper Cupric Chloride ------- Copper Sulphate ------- Precipitated Coated & Directly Compressible Calcium Carbonate ------- Fumaric Acid ------- Ferric Chloride ------- Lithium Carbonate ------- Magnesium Chloride ------- Magnesium Sulphate ------- Maleic Acid ------- Malic Acid ------- Manganese Chloride ------- Manganese Sulphate ------- Octyl Dodecanol ------- Oleic Acid ------- Phenyl Ethanol ------- Potassium Bromide ------- Potassium Chloride ------- Potassium Hydroxide Pellets ------- Potassium Monopersulfate ------- Potassium Phosphate Monobasic Dibasic Tribasic ------- Propylene Carbonate ------- Selenious Acid ------- Sodium Acetate ------- Sodium Diacetate ------- Sodium Hydroxide Pellets------- Sodium Thiosulfate ------- Sodium Formaldehyde Bisulfite ------- Sodium Perborate ------- Vanadyl Sulfate ------- Zinc Chloride