Barium Peroxide SDS MSDS Sheet of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Barium Peroxide, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.
Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Home ---------- Contact Aadhunik Industries Ankleshwar ---------- TranslateTranslate

Sea Export Air Export Drum Packing Jumbo bag packing Liquid Chemical Packing Packing Palletized for Exports Chemical Liquid Bulk Exports
Barium Peroxide Manufacturers

Specifications of Barium Peroxide Manufacturers

Barium Peroxide SDS MSDS Sheet, Material safety Data Sheet

1. Product Identification

Product Name: Barium Peroxide.
CAS No.
: 1304-29-6
EINECS: EC Number: 215-128-4

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Oxidizing solids Category 3
Acute toxicity, Oral Category 4
Acute toxicity, Inhalation (Category 4)

Labelling according Regulation (EC) No 1272/2008

GHS Label Elements
Oxidizer
Oxidizing Solid

GHS Label Elements
Irritation
Irritant

Signal word: Danger

Hazard statement(s):
H272 May intensify fire; oxidizer.
H302 Harmful if swallowed.
H332 Harmful if inhaled.

Precautionary statement(s):
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P220 Keep/Store away from clothing/ combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ eye protection/ face protection.
P330: Rinse mouth.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+378: In case of fire: Use Water spray, Foam for extinction.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P308+313: IF exposed or concerned: Get medical advice/attention.
P403+233: Store in a well ventilated place. Keep container tightly closed.
P501: Dispose of contents/container to an authorized agent only.

Classification according to Directive 67/548/EEC or Directive 1999/45/EC:
Xn = Harmful
R20 Harmful by inhalation
R22 Harmful if swallowed
O = Oxidising
R8 = Contact with combustible material may cause fire.

3. Composition/Information on Ingredients

Product Name: Barium Peroxide.
CAS No.
: 1304-29-6
EINECS: EC Number: 215-128-4

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Flammability of the Product: Non-flammable but it is an oxidizer.
Products of Combustion: It emits oxides of barium and fumes when heated to decomposition.
Fire: It is supporting fire as an oxidizer.
Explosion: Contact with oxidizable substances may cause explosion.
Fire Extinguishing Media: Water spray, Foam. Use means suitable for extinguishing surrounding fire. Avoid carbon dioxide and gas filled extinguisher.
Special Information: It is an oxidizer. In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Small Spill: Eliminate all sources of ignition. Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Eliminate all sources of ignition. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system if local laws permit.

7. Handling and Storage

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool <32C, dry, ventilated area. Protect against physical damage heat or contact with combustible substances.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: TWA 0.5 mg/m3, USA. Occupational Exposure Limits (OSHA) - Table Z-1 Limits for Air Contaminants.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: White to Tan crystals or powder.
Odor: None.
Solubility: Soluble in water.
pH: 10 at 1% solution at 25 C (77F)
Density: Not available.
Molecular Weight: 169.33
Chemical Formula: BaO2
% Volatile by volume @ 21C (70F): 0
Boiling Point: Not available
Melting Point: Decomposes.

10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. It becomes unstable by heat and moisture.
Hazardous Decomposition Products: Oxygen, oxides of barium.
Hazardous Polymerization: Will not occur.
Incompatibilities: Organic substances, Strong reducing agents, Powdered metals, Strong bases, Alcohols, phosphorous, Anhydrides, Halogens, Acids Metal powders and Reducing agents. Heat.
Conditions to Avoid: Moisture, Heat, Incompatibles.

11. Toxicological Information

Toxicity to Animals:
LD50 Subcutaneous: 50 mg/kg [Mouse].
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

12. Ecological Information

Environmental Toxicity: Not available.
Persistence and degradability: No data available. Persistence is unlikely based on information available.
Bioaccumulative potential: No data available.
Mobility in soil: No data available. Likely to be mobile in the environment due to its water solubility.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

14. Transport Information

DOT (USA)
Shipping Name: Barium peroxide
Hazard Class: 5.1
UN Number: UN1449
Packing Group: II
IMDG
Shipping Name: Barium peroxide
Hazard Class: 5.1
UN Number: UN1449
Packing Group: II
IATA
Shipping Name: Barium peroxide
Hazard Class: 5.1
UN Number: UN1449
Packing Group: II

15. Regulatory Information

USA:
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: Fire Hazard, Immediate (Acute) Health Hazard.
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

16. Other Information

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 1304-29-6, Barium Peroxide manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries

Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

Aadhunuk Industries Ankleshwar Gujarat India

Copyright and Usual Disclaimer is Applicable. 4-12-2022

Barium Chloride ------- Calcium Chloride ------- Calcium Oxide ------- Calcium Hydroxide ------- Calcium Propionate ------- Calcium D Saccharate ------- Calcium Sulfate ------- Magnesium Chloride ------- Magnesium Oxide ------- Magnesium Sulphate ------- Sodium Acetate ------- Sodium Diacetate ------- Sodium Hydroxide Pellets ------- Sodium Metabisulphite ------- Sodium Propionate ------- Sodium Thiosulfate ------- Sodium Formaldehyde Bisulfite ------- Sodium Phosphate Monobasic Dibasic Tribasic ------- Sodium Perborate ------- Zinc Chloride

Magnesium Cloride Anhydrous Powder Flakes Chips Blocks