Ammonium Molybdate SDS MSDS Sheet of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Ammonium Molybdate, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Product Name: Ammonium Molybdate 13106-76-8 or Ammonium Molybdate Tetrahydrate (Molybdic acidammonium salttetrahydrate, Ammonium heptamolybdatetetrahydrate)12054-85-2
CAS-No. : 13106-76-8 or 12054-85-2 or 12027-67-7
EINECS EC-Number: 236-031-3
Use of the substance/mixture: For laboratory and industrial use only.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Skin:Wash off with soap and plenty of water.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: Never give anything by mouth to an unconscious person.

Flammabilityof the Product: Non-flammable.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistantfoam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: nitrogen oxides (NOx), Molybdenum oxides.
Advice for firefighters: Wear self contained breathing apparatus for firefighting if necessary.

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Avoid dust formation. Avoid breathing vapors, mist or gas. Use a shovel to put the material into a convenient waste disposal container. Do not let product enter drains. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Precautions: Do not breathe dust or mist. Keep away from incompatibles such as oxidizing agents, acids.
Storage: Keep container of tightly closed. Keep container in a cool, well-ventilated area.

Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits:
TWA 5 mg/m3 USA. OSHA.
TWA 0.5 mg/m3 USA. ACGIH (TLV)

Physical state and appearance: Solid. crystals.
Color: Colorless. White.
Odor: Odorless.
Decomposition Temperature: 190C for Tetrahydrate
pH (1% soln/water): Not available.
Melting Point: Not available.
Specific Gravity: 2.5 for Tetrahydrate (Water = 1)
Solubility: Soluble in cold water.

Stability: Stable under the condition of storage.
Conditions of Instability: Incompatible materials
Incompatibility with various substances: Reactive with oxidizing agents, acids.
Polymerization: Will not occur.

Toxicity to Animals:
Ammonium Molybdate Tetrahydrate
LD50 Oral - rat: > 2.000 mg/kg
LC50 Inhalation - rat: 4 h - 5 mg/l
LD50 Dermal - rabbit: > 2.000 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Toxicity to fish: LC0 - Oncorhynchus mykiss (rainbow trout) - 320 mg/l - 96 h
LC50 - Oncorhynchus mykiss (rainbow trout) - 420 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 140 mg/l - 48 h
Toxicity to algae: EC50 - Desmodesmus subspicatus (green algae) - 41 mg/l - 72 h
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.

DOT (USA) & ADR/RID : Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods

Ammonium Molybdate Tetrahydrate (12054-85-2)
USA TSCA: Listed on the United States TSCA (Toxic Substances Control Act) inventory
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: Acute Health Hazard
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

CAS Number 13106-76-8 or 12054-85-2 or 12027-67-7, Ammonium Molybdate Pure and USP ACS Reagent Grade manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.