Alkyl Diphenyl Oxide Sulfonate Surfactant SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Alkyl Diphenyl Oxide Sulfonate Surfactant, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.
Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Home ---------- Contact Aadhunik Industries Ankleshwar ---------- TranslateTranslate

Sea Export Air Export Drum Packing Jumbo bag packing Liquid Chemical Packing Packing Palletized for Exports Chemical Liquid Bulk Exports Alkyl Diphenyl Oxide Sulfonate Surfactant Manufacturers

Specifications of Alkyl Diphenyl Oxide Sulfonate Surfactant Manufacturers

Alkyl diphenyl oxide sulfonate surfactant SDS, Safety Data Sheet
MSDS, Material Safety Data Sheet
 10-Oct-21

SECTION 1. PRODUCT IDENTIFICATION

Product Name & Other Names: Alkyl diphenyl oxide sulfonate surfactant.
CAS Number: Mixture
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per the letterhead.

SECTION 2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation (Category 2) H315
Serious eye damage (Category 1) H318

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H315: Causes skin irritation.
H318: Causes serious eye damage.

Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P501: Dispose of contents/ container to an approved waste disposal plant.

SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS

Product Name & Other Names: Alkyl diphenyl oxide sulfonate surfactant.
It is a mixture containing as under:
1. Benzene, 1,1'-oxybis-, tetra propylene derivatives, sulfonate
CAS Number: 119345-04-9
Percentage: 44% to 50%
2. Sulfuric acid disodium salt
CAS Number: 7757-82-6
Percentage: 1%
3. Water
CAS Number: 7732-18-5
Percentage: Balance.

SECTION 4. FIRST AID MEASURES

Always seek medical attention after first aid measures are provided.

Eye Contact: Do not allow victim to rub eyes. Let the eyes water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention.
Skin Contact: Remove contaminated clothing, shoes, and leather goods (e.g., watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING.

SECTION 5. FIRE FIGHTING MEASURES

Fire and Explosion Hazards: Will burn on heating. The presence of water in the product, reduces burning tendency.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Apart from oxides of carbon. toxic fumes of sulfur dioxide and undefined fumes may result from combustion. Closed containers may explode from heat of a fire. Use water spray to cool unopened containers.
Extinguishing Media Not recommended: Avoid using solid water jet as it may scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Procedures for Cleanup: Stop release, if possible, to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact.
Environmental Precautions: Contamination of soil and water should be prevented. Keep spillage and runoff from storage areas from entering soil, streams, or sewers.

SECTION 7. HANDLING AND STORAGE

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Keep away from sources of ignition - No smoking. Take measures to prevent the build-up of electrostatic charge. Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. generating dust/mist and the release of dust into the workplace. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Do not store with incompatible materials like oxidizing agents.

SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure Guidelines: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Colorless to yellow liquid.
Odor: Odorless.
Odor threshold: No data found.
pH: 8 to 10.5 @ 10% solution.
Relative density: around 1.1 to 1.2
Melting point/freezing point: No data found.
Initial boiling point and boiling range: No data found.
Flash point: No data found.
Auto-ignition temperature: No data found.
Decomposition temperature: No data found.
Upper/lower flammability or explosive limits: No data found.
Vapor pressure: No data found.
Vapor density: No data found.
Evaporation rate: No data found.
Flammability (solid, gas): No data found.
Partition coefficient: n-octanol/water: No data found.
Solubility(ies): Miscible with water.
Viscosity: Viscosity at 25C: 145 cps.

SECTION 10. STABILITY AND REACTIVITY

Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not occur.
Incompatibilities: Oxidizing agents. Avoid excessive heat. Avoid contact with strong acids.
Hazardous Decomposition Products: High temperature operations will generate carbon oxide and fumes. Under such conditions, sulfur dioxide will also be generated.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute Toxicity:
LD50 Oral - Rat - male and female: >2000 mg/kg.
LD50 Dermal - Rabbit – male: >2000 mg/kg
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

SECTION 12. ECOLOGICAL INFORMATION

Eco toxicological data: not available. It is an environmentally hazardous substance
Persistence and Degradability: Soluble in water Persistence is unlikely.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.

SECTION 13. DISPOSAL CONSIDERATIONS

Do not wash the material down drain. Put uncontaminated material back into the process if possible. Place contaminated material in suitable, labeled containers for disposal.

SECTION 14. TRANSPORT INFORMATION

DOT USA, TDG Canada & ADR/RID Europe:
Proper shipping name Environmentally hazardous substance, liquid, n.o.s.(DODECYL DIPHENYL OXIDE DISULPHONATE)
UN number UN 3082
Class 9, Packing group III.
Marine pollutant DODECYL DIPHENYL OXIDE DISULPHONATE.
IATA/ICAO:
Proper shipping name Environmentally hazardous substance, liquid, n.o.s.(DODECYL DIPHENYL OXIDE DISULPHONATE)
UN number UN 3082
Class 9, Packing group III.
Marine pollutant DODECYL DIPHENYL OXIDE DISULPHONATE.
IMDG/IMO:
Proper shipping name Environmentally hazardous substance, liquid, n.o.s.(DODECYL DIPHENYL OXIDE DISULPHONATE)
UN number UN 3082
Class 9, Packing group III.
Marine pollutant DODECYL DIPHENYL OXIDE DISULPHONATE.

SECTION 15. REGULATORY INFORMATION

USA Regulations:
SARA 311/312 Hazards: See section 2.
California Prop. 65 Components: Not listed.

SECTION 16 - ADDITIONAL INFORMATION

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number yy, Alkyl Diphenyl Oxide Sulfonate Surfactant manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries

Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

Aadhunuk Industries Ankleshwar Gujarat India

Copyright and Usual Disclaimer is Applicable. 3-12-2022

Acetic Acid Glacial ------- Ammonium Bicarbonate ------- Aluminum Chloride ------- Aluminium Potassium Sulphate ------- Ammonium Carbonate ------- Ammonium Carbamate ------- Ammonium Chloride ------- Ammonium Persulfate------- Barium Chloride ------- Benzyl Alcohol ------- Benzoic Acid ------- Boric Acid ------- Borax ------- Calcium Chloride ------- Calcium Oxide ------- Calcium Hydroxide ------- Calcium Lactobionate ------- Calcium D Saccharate ------- Calcium Sulfate ------- Carbamide Peroxide ------- Chromic Chloride -------Copper Cupric Chloride ------- Copper Sulphate ------- Precipitated Coated & Directly Compressible Calcium Carbonate ------- Fumaric Acid ------- Ferric Chloride ------- Formaldehyde Solution ------- Lithium Carbonate ------- Magnesium Chloride ------- Magnesium Sulphate ------- Maleic Acid ------- Malic Acid ------- Manganese Chloride ------- Manganese Sulphate ------- Octyl Dodecanol ------- Oleic Acid ------- Phenyl Ethanol ------- Potassium Bromide ------- Potassium Chloride ------- Potassium Hydroxide Pellets ------- Potassium Monopersulfate ------- Potassium Phosphate Monobasic Dibasic Tribasic ------- Propylene Carbonate ------- Selenious Acid ------- Sodium Acetate ------- Sodium Diacetate ------- Sodium Hydroxide Pellets------- Sodium Thiosulfate ------- Sodium Formaldehyde Bisulfite ------- Sodium Perborate ------- Vanadyl Sulfate ------- Zinc Chloride

Magnesium Cloride Anhydrous Powder Flakes Chips Blocks