L-selenomethionine SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of L-selenomethionine, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

CAS Number: 3211-76-5, EINECS EC Number: 608-705-0, Molecular Formula: C5H11NO2Se, Molecular Weight: 196.11

Product Name & Other Names: L-Selenomethionine or 2-Amino-4-(methylselanyl)butanoic acid.
CAS No.: 3211-76-5
EINECS EC Number: 608-705-0
Chemical Formula: C5H11NO2Se
Molecular Weight: 196.11
Relevant uses and uses advised against (if any): Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, Inhalation (Category 3), H331
Acute toxicity, Oral (Category 3), H301
Specific target organ toxicity - repeated exposure (Category 2), H373
Chronic aquatic toxicity (Category 1), H410

Hazard statements:
H301 Toxic if swallowed.
H331 Toxic if inhaled.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P314: Get medical advice/attention if you feel unwell.
P330: Rinse mouth.
P301+310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308 + P311: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
P391: Collect spillage.
P405: Store locked up.
P403+233: Store in a well-ventilated place. Keep container tightly closed.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
T = Toxic.
N = Dangerous for the environment.
Risk Phrase:
R23/25 = Toxic by inhalation and if swallowed.
R48 Danger of serious damage to health by prolonged exposure.
R50/53 = Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Product Name & Other Names: L-Selenomethionine or 2-Amino-4-(methylselanyl)butanoic acid.
CAS No.: 3211-76-5
EINECS EC Number: 608-705-0

Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin: Immediately flush skin with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and shoes before reuse. Get medical attention if irritation develops.
Eyes: Immediately flush eyes with plenty of water for 15 minutes, occasionally lifting upper and lower eyelids. Hold eyelids apart during irrigation. Get medical attention.
Inhalation: Remove person to fresh air. If breathing is difficult, give oxygen. If not breathing administer artificial respiration. Get medical attention.

Flash Point: N/A
Auto ignition Temperature: N/A
Fire/Explosion: Not considered to be a fire and explosion hazard.
Extinguishing Medium: Water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Fire Fighting Instructions: Use suitable protective equipment for surrounding fire.
Hazardous combustion products: Carbon oxides. Nitrogen oxides.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.

Precautions for safe handling: Avoid prolonged or repeated exposure. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Protect against moisture.

Exposure Limits:
OSHA PEL: 0.2 mg/COM Ceiling for Selenium compounds (as Se).
ACGIH TLV: 0.2 mg/CBM (TWA) Selenium compounds (as Se).
Engineering Controls: Use adequate exhaust ventilation to keep airborne concentrations below the allowable exposure limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards.

Appearance: White powder or crystals.
Odor: Not available.
Odor threshold: Not available.
pH: Not available.
Relative density: about 3.95
Melting Point: 265C literature.
Boiling Point: 321C literature.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Very slightly soluble in water.
Viscosity: Not available.

Chemical Stability: Stable under normal temperatures and pressures. Fine dust, when whirled up a dust explosion potential may generally be assumed. Violent reactions possible with: Strong oxidizing agents.
Incompatibility (Materials to Avoid): Strong reducing agents.
Conditions to Avoid: Incompatible materials, exposure to moist air or water, excessive heat and direct sunlight.
Hazardous Decomposition Products: Selenium Oxide, Carbon oxides, Nitrogen oxides and Fumes.
Hazardous Polymerization: Will not occur.

Toxicity to Animals: LD50 Oral - Rat - Not available.
Carcinogenicity: Not listed as a suspected/confirmed carcinogen by ACGIH, NTP, OSHA. It is group 3 (Not classifiable as a human carcinogen) as per IARC
Mutagenic: Not available.
Reproductive Effects: No information available.
Developmental Effects: No information available.
The toxicological effects of this product have not been thoroughly studied.

Toxicity to fish: Not available.
Ecotoxicity: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Results of PBT and vPvB Assessment: Not available.
Bioaccumulation: No information available.
Mobility in soil: No information available.
Persistence and Degradability: Soluble in water. Persistence is unlikely.
Environmental Precautions: DO NOT DISCHARGE into drains and rivers.

Dispose of in accordance with all applicable regulations at an approved waste disposal facility.

DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN3283
Proper Shipping Name SELENIUM COMPOUND, N.O.S
Proper technical name: (L-SELENOMETHIONINE)
Hazard Class 6.1
Packing Group III
IMDG/IMO
UN-No UN3283
Proper Shipping Name SELENIUM COMPOUND, N.O.S
Proper technical name: (L-SELENOMETHIONINE)
Hazard Class 6.1
Packing Group III
IATA:
UN-No UN3283
Proper Shipping Name SELENIUM COMPOUND, N.O.S
Proper technical name: (L-SELENOMETHIONINE)
Hazard Class 6.1
Packing Group III

USA:
SARA 311/312: See section 2.
California Prop. 65 Components: Not listed.

European Labeling in Accordance with EC Directives:
H301 Toxic if swallowed.
H331 Toxic if inhaled.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 3211-76-5, L-selenomethionine Pure n USP Grade manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.