4-Hydroxybenzaldehyde or para-Hydroxybenzaldehyde or p-Hydroxybenzaldehyde SDS MSDS of Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturer and exporter of 4-Hydroxybenzaldehyde or para-Hydroxybenzaldehyde or p-Hydroxybenzaldehyde, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

4-Hydroxybenzaldehyde or para-Hydroxybenzaldehyde or 4-Formylphenol SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 23-April-25

Product Name & Other Names: 4-Hydroxybenzaldehyde or para-Hydroxybenzaldehyde or 4-Formylphenol
CAS No.: 123-08-0
EINECS EC Number: 204-599-1
FEMA Number: 3984
Relevant uses and uses advised against (if any): Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin irritation Category 2, H315
Serious eye damage/eye irritation Category 2A, H319

Hazard statements:
H315: Causes skin irritation.
H319: Causes serious eye irritation.

Precautionary statements:
P264: Wash … thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.

Product Name & Other Names: 4-Hydroxybenzaldehyde or para-Hydroxybenzaldehyde or 4-Formylphenol
CAS No.: 123-08-0
EINECS EC Number: 204-599-1

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide. Avoid solid water jet as it can scatter the fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Hazardous decomposition products formed under fire conditions: Carbon oxides and fumes.

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Pick up or sweep and place in suitable disposal container. Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements, or confined areas; dike if needed. Eliminate all ignition sources.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizers, bases, strong reducing agents. May form combustible dust concentrations in air. Use care during processing to minimize generation of dust. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust and/or static electricity. Sensitivity to light, sublimable. Sensitive to air. Storage: Store below 30C.

Airborne Exposure Limits: The product does NOT contain substances with Professional Exposure Environmental Limit Values.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures low.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.

Appearance: Off-white or light-yellow crystal.
Odor: Vanilla nutty odor.
Odor threshold: Not information found.
pH: No information found.
Relative density: .13
Boiling Point: 197.5C at 1013 Pa.
Melting Point: 191C @ 50 mm Hg or 310C at 1 atmosphere.
Flash point: 97C (closed cup).
Auto-ignition Temperature: 450C.
Decomposition temperature: No information found.
Upper/lower flammability or explosive limits: No information found.
Vapor pressure: No information found.
Vapor Density (Air=1): 5.23
Evaporation rate: No information found.
Flammability (solid, gas): No information found.
Partition coefficient: n-octanol/water: No information found.
Solubility: Soluble in water.
Viscosity: No information found.

Stability: Stable under ordinary conditions of use and storage. Risk of dust explosion. Forms explosive mixtures with air on intense heating.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide along with fumes may form when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, bases, strong reducing agents. Sublimable. Sensitive to air.
Conditions to Avoid: Direct sunlight, heat, spark, flame, and air. Extremely high or low temperatures, heat, and incompatibles.

LD50 oral rat: 2250 mg/kg.
LD50 dermal rabbit: 7940 mg/kg.
LD50 intraperitoneal mouse: 500 mg/kg.
Carcinogenicity: Not know or anticipated to be a carcinogen by OSHA, ACGIH, NTP or IARC.
Mutagenic Effects: No information found.
Developmental Toxicity: No information found.
Reproductive Effects: No information found.
Teratogenicity: No information found.

Toxicity to fish: No information found.
Persistence and Degradability: Soluble in water Persistence is unlikely.
Mobility: Will likely be mobile in the environment due to its water solubility.
Bioaccumulation/ Accumulation: No information found.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Follow all the pollution control rules.

Land Transport DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
Sea Transport IMO/IMDG: Not regulated.
Air Transport IATA/ICAO: Not regulated.

USA:
SARA 311/312 Hazards: Acute health hazard.
California Prop. 65 Components: Not listed.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

CAS Number 123-08-0, 4-Hydroxybenzaldehyde or para-Hydroxybenzaldehyde or p-Hydroxybenzaldehyde manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.