Polyvinyl Alcohol SDS MSDS of Manufacturers Exporters
Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Polyvinyl Alcohol, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc. Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required. ---------- ---------- Translate
Specifications of Polyvinyl Alcohol Manufacturers
Polyvinyl Alcohol SDS GHS, MSDS Sheet, Material Safety Data Sheet
1. PRODUCT DESCRIPTION
Product Name: Polyvinyl Alcohol or Poly(Vinyl Alcohol)
Synonyms: PVA, PVOH
CAS Number: 9002-89-5
EINECS EC Number: 209-183-3
Molecular Weight: -
Molecular Formula: [-CH2CHOH-]n or C2H4O)x2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
GHS Label Elements
NoneSignal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes eye irritation, if exposed in large quantity.
May be harmful if inhaled, if exposed in large quantity.
May cause respiratory irritation, if exposed in large quantity.Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
HMIS (Perceived): Health hazard: 0, Flammability:1, Physical hazards: 0
NFPA (Perceived): Health hazard: 0, Fire: 1, Reactivity Hazard: 03. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name: Polyvinyl Alcohol or Poly(Vinyl Alcohol)
Synonyms: PVA, PVOH
CAS Number: 9002-89-5
Molecular Weight: [-CH2CHOH-]n or C2H4O)x4. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If Polyvinyl Alcohol is swallowed, if conscious, give plenty of water. Immediately call a physician. Never give anything by mouth to an unconscious person.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Get medical attention.5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use media suitable to extinguish surrounding fire. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Flammable Limits in Air % by Volume: N/A
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.6. SPILL OR LEAK PROCEDURES
Steps to be taken in Case Polyvinyl Alcohol is Released or Spilled:
Avoid dust formation. Avoid breathing vapors, mist or gas. Ventilate area of leak or spill. Wear appropriate personal protective equipment.
Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal. Do not let product enter drains. Small amounts of residue may be flushed to sewer with plenty of water.7. SPECIAL PRECAUTIONS
Keep in a well closed container stored under cold to warm conditions, 2 to 40 C, (36 to 104F) in a ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.8. SPECIAL PROTECTION INFORMATION
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation Local Exhaust: Yes
Eye Protection: Splash proof chemical safety goggles should be worn at all times.
Other Protective Clothing or Equipment: Lab apron, eye wash, and safety shower.9. PHYSICAL DATA
Molecular Weight: -
Molecular Formula: [-CH2CHOH-]n or C2H4O)x
Appearance and Odor: Solid material granules, crystals or powder. Odor not defined.
pH: 5-7 at 4% water solution.
Melting Point: 200°C - lit.
Boiling Point: NA. Decomposes between 200-250
Density: 1.19 to 1.31 g/cm3
Percent Volatile by Volume: No data.
Evaporation Rate(H2O=1): No data.
Solubility in Water: No data.10. REACTIVITY DATA
Stability: Polyvinyl Alcohol is stable
Conditions to Avoid: Heat, humidity, Dust generation.
Incompatibility (Materials to Avoid): Strong oxidizing and reducing agents, Strong acids and bases.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide
Hazardous Polymerization: Will not occur11. TOXICITY DATA
Acute toxicity:
LD50 Oral - rat - > 20.000 mg/kg
LD50 Dermal - rat - > 20.000 mg/kg
Carcinogenicity: This product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, NTP, ACGIH & OSHA.12. ECOLOGICAL DATA
Toxicity to fish: LC50 >1000mg/liter over 48 hours exposure on killfish.
Toxicity: Avoid release into the environment. Runoff from fire control or dilution water may cause pollution.
Bioaccumulative potential: Does not bioaccumulate.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose Polyvinyl Alcohol in accordance with all applicable Federal, State and Local regulations.
14. TRANSPORT INFORMATION
DOT
Not regulated.
IMDG
Not regulated.
IATA
Not regulated.15. REGULATORY INFORMATION
Section 355 (extremely hazardous substances): Substance is not listed.
Section 313 (Specific toxic chemical listings): Substance is not listed.
TSCA (Toxic Substances Control Act): Substance is listed.
Proposition 65: Listed16. ADDITIONAL INFORMATION
Disclaimer:
******************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
******************************CAS Number 9002-89-5, Polyvinyl Alcohol Commercial Pure and BP Grade manufacturers suppliers exporters at:
manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.e-mail: info@aadhunikindustries.com
Copyright and Usual Disclaimer is Applicable. 8-12-2022