Lithium Carbonate USP BP Grade Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Lithium Carbonate, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

Lithium carbonate is an inorganic compound, the lithium salt of carbonate with the formula Li2CO3. This white salt is widely used in the processing of metal oxides. For the treatment of bipolar disorder, it is on the World Health Organization's List of Essential Medicines, the most important medications needed in a basic health system.

Lithium Carbonate USP Grade
Li2CO3 --- 73.89
Carbonic acid, dilithium salt.
Dilithium carbonate -- [554-13-2].
Lithium Carbonate contains not less than 99.0 percent of Li2CO3, calculated on the dried basis. Identification:
A: It effervesces upon the addition of an acid, yielding a colorless gas which, when passed into calcium hydroxide, immediately causes a white precipitate to form.
B: When moistened with hydrochloric acid, it imparts an intense crimson color to a nonluminous flame.
Reaction: A saturated solution is alkaline to litmus.
Loss on drying: Dry it at 200 for 4 hours: it loses not more than 1.0% of its weight.
Insoluble substances: Transfer 10 g to a 250-mL beaker, add 50 mL of water, then add slowly 50 mL of 6 N hydrochloric acid. Cover with a watch glass, and boil the solution for 1 hour. Filter the solution through a dried, tared filtering crucible fitted with a glass-fiber filter disk, using suction. Wash the filter with hot water until the last washing is free from chloride when tested with. Dry the crucible in an oven at 110 for 1 hour: the weight of the residue is not more than 0.02% of the weight of Lithium Carbonate taken.
Chloride: To 500 mg of it add 1.2 mL of nitric acid, dilute with water to 50 mL, and add 1 mL of silver nitrate any turbidity formed is not greater than that produced in a similarly treated control solution containing 0.50 mL of 0.020 N hydrochloric acid (0.07%).
Sulfate: Dissolve 1.0 g in 10 mL of 3 N hydrochloric acid, dilute with water to 40 mL, and add 1 mL of barium chloride. Prepare a standard solution of equal volume containing 1.0 mL of 0.020 N sulfuric acid, 1 mL of 3 N hydrochloric acid, and 1 mL of barium chloride. The turbidity produced in the test solution, after 3 minutes, is not greater than that produced in the standard solution (0.1%).
Aluminum and iron: Dissolve 500 mg in 10 mL of water by the dropwise addition, with agitation, of hydrochloric acid. Boil the solution, then cool it, and to 5 mL of the solution add 6 N ammonium hydroxide until the reaction is alkaline: no turbidity or precipitate is observed.
Calcium: Suspend 5.0 g in 50 mL of water, and add a slight excess of 3 N hydrochloric acid. Boil the clear solution to expel carbon dioxide, add 5 mL of ammonium oxalate, render alkaline with 6 N ammonium hydroxide, and allow to stand for 4 hours. Filter through a filtering crucible, and wash with warm water until the last washing yields no turbidity with calcium chloride. Place the crucible in a beaker, cover it with water, add 3 mL of sulfuric acid, heat to 70 , and titrate with 0.10 N potassium permanganate to a pale pink color that persists for 30 seconds. Not more than 3.76 mL of 0.10 N potassium permanganate is consumed (0.15%).
Sodium: the sodium limit is 0.1%.
Heavy metals: the limit is 0.002%.

Lithium Carbonate BP Grade
Ph Eur
Li2CO3 --- 73.9 --- 554-13-2

DEFINITION
Content: 98.5 per cent to 100.5 per cent.

CHARACTERS
Appearance: White or almost white powder.
Solubility: Slightly soluble in water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. When moistened with hydrochloric acid, it gives a red colour to a non-luminous flame.
B. Dissolve 0.2 g in 1 ml of hydrochloric acid. Evaporate to dryness on a water-bath. The residue dissolves in 3 ml of ethanol (96 per cent).
C. It gives the reaction of carbonates.

TESTS
Solution S: Suspend 10.0 g in 30 ml of distilled water and dissolve by the addition of 22 ml of nitric acid. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 100 ml with distilled water.
Appearance of solution: Solution S is clear and colourless.
Chlorides: Maximum 200 ppm.
Sulphates: Maximum 200 ppm.
Arsenic: Maximum 2 ppm, determined on 0.5 g.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Magnesium: Maximum 150 ppm.
Potassium: Maximum 300 ppm.
Sodium: Maximum 300 ppm.

CAS Number 554-13-2, Lithium Carbonate USP BP Grade manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.