PCC Coated & Directly Compressible Calcium Carbonate Manufacturers Exporters

Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of PCC Coated & Directly Compressible Calcium Carbonate, Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Russia etc.

Aadhunik Industries and/or associated units are FDA-GMP certified, Halal and/or Kosher certified, REACH registered, ISO-9001, ISO-22000 HACCP certified. We offer crystals granules in precise micron or mesh size as per buyers needs. We offer very high purity standards as per specifications required.

CaCO3 100.09
Carbonic acid, calcium salt (1:1)
Calcium Carbonate, dried at 200 for 4 hours, contains calcium equivalent to not less than 98.0 percent and not more than 100.5 percent of CaCO3.

Packaging and storage— Preserve in well-closed containers.
Identification— The addition of acetic acid to it produces effervescence (presence of carbonate), and the resulting solution, after boiling, responds to the tests for Calcium.
Loss on drying— Dry it at 200 for 4 hours: it loses not more than 2.0% of its weight.
Acid-insoluble substances— Mix 5.0 g with 10 mL of water, and add hydrochloric acid, drop wise, with agitation, until it ceases to cause effervescence, then add water to make the mixture measure 200 mL, and filter. Wash the insoluble residue with water until the last washing shows no chloride, and ignite: the weight of the residue does not exceed 10 mg (0.2%).
Limit of fluoride— The limit is 0.005%.
Arsenic— The limit is 3 ppm.
Barium— A platinum wire, dipped in the filtrate obtained in the test for Acid-insoluble substances and held in a non-luminous flame, does not impart a green color.
Lead —the limit is 3 ppm.
Iron— To pass the test
Mercury— the limit is 0.5 µg per g.
Limit of magnesium and alkali salts— Mix 1.0 g with 35 mL of water, carefully add 3 mL of hydrochloric acid, heat the solution, and boil for 1 minute. Rapidly add 40 mL of oxalic acid TS, and stir vigorously until precipitation is well established. Add immediately to the warm mixture 2 drops of methyl red TS and then 6 N ammonium hydroxide, drop wise, until the mixture is just alkaline. Cool to room temperature, transfer to a 100-mL graduated cylinder, dilute with water to 100 mL, mix, and allow to stand for 4 hours or overnight. Filter, and to 50 mL of the clear filtrate in a platinum dish add 0.5 mL of sulfuric acid, and evaporate the mixture on a steam bath to a small volume. Carefully heat over a free flame to dryness, and continue heating to complete decomposition and volatilization of ammonium salts. Finally ignite the residue to constant weight.
The weight of the residue does not exceed 5 mg (1.0%).
Heavy metals— the limit is 0.002%.
Organic volatile impurities— meets the requirements.

CaCO3 100
Action and use
Antacid.
Preparations
CaCO3 Chewable Tablets
Calcium and Colecalciferol Tablets

DEFINITION
Content
98.5 per cent to 100.5 per cent (dried substance).

CHARACTERS
Appearance
White or almost white powder.
Solubility
Practically insoluble in water.

IDENTIFICATION
A. It gives the reaction of carbonates
B. 0.2 ml of solution S (see Tests) gives the reactions of calcium

TESTS
Solution S
Dissolve 5.0 g in 80 ml of dilute acetic acid R . When the effervescence ceases, boil for 2min. Allow to cool, dilute to 100 ml with dilute acetic acid R and filter, if necessary, through a sintered-glass filter.
Substances insoluble in acetic acid
Maximum 0.2 per cent.
Chlorides
Maximum 330 ppm.
Sulphates
Maximum 0.25 per cent.
Arsenic
Maximum 4 ppm, determined on 5 ml of solution S.
Barium
To 10 ml of solution S add 10 ml of calcium sulphate solution R . After at least 15 min, any opalescence in the solution is not more intense than that in a mixture of 10 ml of solution S and 10 ml of distilled water R.
Iron
Maximum 200 ppm.
Magnesium and alkali metals
Maximum 1.5 per cent.
Heavy metals
Maximum 20 ppm.

CaCO3 Formula wt 100.09
CAS: [471-34-1]

DESCRIPTION
Calcium Carbonate occurs as a fine, white or colorless, microcrystalline powder. It is stable in air, and it is practically insoluble in water and in alcohol. The presence of any ammonium salt or carbon dioxide increases its solubility in water, but the presence of any alkali hydroxide reduces the solubility.
Function: pH control agent; nutrient; dough conditioner; firming agent; yeast nutrient.

REQUIREMENTS
Identification: A sample dissolves, with effervescence, in 1 N acetic acid, in 2.7 N hydrochloric acid, and in 1.7 N nitric acid, and the resulting solutions, after boiling, give positive tests for Calcium.
Assay: Not less than 98.0% and not more than 100.5% of CaCO3 after drying.
Acid-Insoluble Substances: Not more than 0.2%.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 0.005%.
Lead: Not more than 3 mg/kg.
Loss on Drying: Not more than 2%.
Magnesium and Alkali Salts: Not more than 1%.

CaCO3
Formula Wt 100.09
CAS Number 471-34-1

REQUIREMENTS

Assay (dried basis) 99.0% CaCO3 min

MAXIMUM ALLOWABLE

Insoluble in dilute hydrochloric acid 0.01%

Ammonium hydroxide precipitate 0.01%

Chloride (Cl) 0.001%

Sulfate (SO4) 0.0015%

Ammonium (NH4) 0.003%

Barium (Ba) 0.01%

Heavy metals (as Pb) 0.001%

Iron (Fe) 0.003%

Magnesium (Mg) 0.02%

Potassium (K) 0.01%

Sodium (Na) 0.1%

Strontium (Sr) 0.1%

We also offer Coated Calcium Carbonate based on Stearic Acid or Titanate Coating.

Specifications of DC Directly Compressible Calcium Carbonate (90% or as required) Show/Hide Detailed List

Description: White to off-white granular powder
Assay: Calcium Carbonate minimum 90% or as required.
Binder: Maltodextrine
Tapped density: Not less than 0.9 m/cc
Moisture / LOD @ 105C: Not more than 1.5%
Acid insoluble substances: Not more than 0.2%
Arsenic: Not more than 1ppm
Heavy metals as Pb: Not more than 5ppm
Lead Pb: Not more than 0.5ppm
Cadmium: Not more than 1ppm
Chloride: Not more than 330ppm
Sulphate: Not more than 0.25%
Mercury: Not more than 0.1ppm
Iron: Not more than 200ppm
Magnesium & Alkali metals: Not more than 1%
Particle size distribution:
Through 16 mesh: Not less than 98%
Through 18 mesh: Not less than 95%
Through 200 mesh: Not more than 20%
On 60 mesh: Not more 75%
Microbial Count: Total plate count: Not more than 1000cfu/gm; Yeast & Mould count: Not more than 100cfu/gm

CAS Number yy, PCC Coated & Directly Compressible Calcium Carbonate manufacturers suppliers exporters at:

manufacturer supplier exporter
Aadhunik Industries
Ankleshwar Gujarat & Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

Insoluble in dilute hydrochloric acid	0.01%
Ammonium hydroxide precipitate	0.01%
Chloride (Cl)	0.001%
Sulfate (SO4)	0.0015%
Ammonium (NH4)	0.003%
Barium (Ba)	0.01%
Heavy metals (as Pb)	0.001%
Iron (Fe)	0.003%
Magnesium (Mg)	0.02%
Potassium (K)	0.01%
Sodium (Na)	0.1%
Strontium (Sr)	0.1%